Application Type Seal 1 Part or 2 Part 2 Part Material Form Resin Industry Light Emitting Diodes (LEDs), Optical parts Manufacturer Dow Chemistry Silicone, Solvent-free Cure Method Heat, Addition cure Cure Temperature (°C) 150 Cure Time (min) 1.00 High Temperature Resistance (°C) 200 Low Temperature Resistance (°C) -45 Light Refractive Index (RI) High, 1.5320, 1.5160, 1.5140
Technical Data for Dow SR-7010
- Sealant - Seal
1 Part or 2 Part
- 1 Part or 2 Part - 2 Part
- Other - Resin
- Optical - Optical parts
- LED (Light-Emitting Diodes) - Light Emitting Diodes (LEDs)
- Other - Lenses
- 2-Part Cure - Addition cure
Cure Temperature (°C) 150 Cure Time (min) 1.00 Mix Ratio 1:1 (by volume)
High Temperature Resistance (°C) 200 Low Temperature Resistance (°C) -45
Dielectric Strength (V/mil) Durable
Shore D Hardness 67 Flexibility Flexible
Light Refractive Index (RI) High, 1.5320, 1.5160, 1.5140 Test Method Coefficient of Thermal Expansion (CTE) 200 (ppm/°C) Flash Point (°F) 212.0 % Solids (%) 100
Shelf Life Details Shelf life is indicated by the “Use Before” date found on the product label., Dow Corning two-part products should be stored at or below 25°C (77°F). Containers should be kept tightly closed at all times to extend shelf life., Check the product label for specific storage conditions. Shelf Life Type From date of manufacture Shelf Life (mon) 9
Best Practices for Dow SR-7010
Surfaces should be clean and dry. Recommended cleaning methods include Dow Corning® brand OS Fluids, naphtha, mineral spirits, methyl ethyl ketone (MEK) or other suitable solvent. Rougher surfaces tend to promote adhesion of silicones to other surfaces.
These products are also compatible with commercially available equipment and industry standard processes. These materials can be dispensed or molded depending on the product and application.
Dow Corning OS Fluids are recommended to clean cured or uncured silicone residue from application equipment.
If a substrate or material is questionable with respect to potentially causing inhibition of cure, it is recommended that a small scale compatibility test be run to ascertain suitability in a given application. The presence of liquid or uncured product at the interface between the questionable substrate and the cured silicone indicates incompatibility and inhibition of cure.
Comparable Materials for Dow SR-7010
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.