Elantas (Altana) FP-1306 Datasheet Elantas (Altana) FP-1306

Information provided by Gluespec
  • Description for Elantas (Altana) FP-1306

    A two-component urethane system designed for use as a sealant.

    *See Terms of Use Below

    Brand Cytec
    Application Type Seal
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Manufacturer Elantas (Altana)
    Chemistry urethane
    Cure Method Resin/Hardener
    Cure Temperature (°C) 25, 80
    Cure Time (min) 10,080, 960
    Viscosity (cPs) 16,000
  • Technical Data for Elantas (Altana) FP-1306

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Chemistry
    • Cure Method
      • 2-Part Cure - Resin/Hardener
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 80
    Cure Time (min) 10,080, 960
    Viscosity (cPs) 16,000 Test Method
    Work / Pot Time (min) 48 Test Method
    Mix Ratio 100:75 (by weight)
    Bond Strength
    Tear Strength (piw) 250 (pli) Test Method
    Tensile Strength (psi) 29,000 Test Method
    Hardness
    Shore A Hardness 88 Test Method
    Shore D Hardness 65 Test Method
    Elongation (%) 110 Test Method
  • Best Practices for Elantas (Altana) FP-1306

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) FP-1306

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Q&A Tutorial on the Adhesive Sealant Selection Process

Read Article

What are the Types of Adhesive Sealants? An In-Depth Q&A

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) FP-1306

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Viscosity Test Methods
Viscosity Test Method Temperature
16,000 cPs Sp 7 @ 10 RPM 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
48 min Time to reach 100,000 cps - 170 grams 25°C
Tear Strength Test Methods
Tear Strength Cure Temperature
250 (pli) 65°C
Tensile Strength Test Methods
Tensile Strength Cure Temperature
29,000 psi 65°C
Elongation Test Methods
Elongation Test Method
110 % cured at 65°C
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
88 After 24 hours at room temperature
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
65 After 24 hours at room temperature