Resin Designs GT-1620 Sealing Strip Datasheet Resin Designs GT-1620 Sealing Strip

Information provided by Gluespec
  • Description for Resin Designs GT-1620 Sealing Strip

    Rubber backed; one side tacky; flame resistant; forms tight environmental seal; prevents corrosion; requires no heat or special tools; allows easy inspection or repair.

    *See Terms of Use Below

    Application Type Seal, Gaskets
    1 Part or 2 Part 1-Part
    Material Form Strip
    Industry Electrical components, Connectors
    Manufacturer Resin Designs
    Chemistry Silicone, Non-flammable: Flame Retardant
    Cure Method Pressure Sensitive
    High Temperature Resistance (°C) 125
    Low Temperature Resistance (°C) -40
    Volume Resistivity (O) >1e11 (ohms/cm)
    Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94HB
  • Technical Data for Resin Designs GT-1620 Sealing Strip

    Overview
    • Application Type
      • Gasketing - Gaskets
      • Sealant - Seal
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Other - Strip
    • Industry
      • Electronics - Electrical components
      • Connectors
      • Industrial - Indoor equipment, Outdoor equipment, Stamped pads
    • Chemistry
      • Non-flammable : Flame Retardant
      • Silicone
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) : UL 94 HB - UL 94HB
    Specifications
    Material Resistance
    High Temperature Resistance (°C) 125
    Low Temperature Resistance (°C) -40
    Conductivity
    Dielectric Strength (V/mil) 225
    Volume Resistivity (O) >1e11 (ohms/cm)
    Hardness
    Elongation (%) >2
    Other Properties
    Specific Gravity 1.100
    Business Information
    Shelf Life Details Because these are precured materials, there is no special storage condition or usage date required. The product should be stored in the original packaging under normal warehouse conditions to maintain the integrity of the packaging materials.
  • Best Practices for Resin Designs GT-1620 Sealing Strip

    *See Terms of Use Below

    1. Application

      Applying Resin Designs connector seal grommets - either automatically or manually - is fast, easy and cost-effective. Grommets form instant environmental barriers in both hot and cold temperatures

      a rapid seaI is created without the delay of lengthy cycles.

  • Comparable Materials for Resin Designs GT-1620 Sealing Strip

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Testing the effectiveness of surface treatments

Read Article

Silicones in LED Lighting | Gluespec

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?