Resin Designs GT-1630 Sealing Strip

CONTACT REP

Description for Resin Designs GT-1630 Sealing Strip

Foam backed; one side tacky; flame resistant; forms tight environmental seal; prevents corrosion; requires no heat or special tools; allows easy inspection or repair.

*See Terms of Use Below

Application Type	Seal, Gasket
1 Part or 2 Part	1-Part
Material Form	Strip
Industry	Connectors, Electrical components
Manufacturer	Resin Designs
Chemistry	Silicone, Non-flammable: Flame Retardant
Cure Method	Pressure Sensitive
High Temperature Resistance (°C)	125
Low Temperature Resistance (°C)	-40
Volume Resistivity (O)	>1e11 (ohms/cm)
Key Specifications	UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94HB

Best Practices for Resin Designs GT-1630 Sealing Strip

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for Resin Designs GT-1630 Sealing Strip

*See Terms of Use Below

Overview

Application Type
- Gasketing - Gasket
- Sealant - Seal
1 Part or 2 Part
- 1-Part
Material Form
- Other - Strip
Industry
- Electronics - Electrical components
- Connectors
- Industrial - Indoor equipment, Outdoor equipment, Stamped pads
Chemistry
- Non-flammable : Flame Retardant
- Silicone
Cure Method
- Pressure Sensitive (min) - Pressure Sensitive
Key Specifications
- UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) : UL 94 HB - UL 94HB

Specifications

Material Resistance

High Temperature Resistance (°C)	125
Low Temperature Resistance (°C)	-40

Conductivity

Dielectric Strength (V/mil)	225
Volume Resistivity (O)	>1e11 (ohms/cm)

Hardness

Elongation (%)	>150

Other Properties

Specific Gravity	1.100

Business Information

Shelf Life Details	Because these are precured materials, there is no special storage condition or usage date required. The product should be stored in the original packaging under normal warehouse conditions to maintain the integrity of the packaging materials.

Best Practices for Resin Designs GT-1630 Sealing Strip

*See Terms of Use Below
1. Application
  
  Applying Resin Designs connector seal grommets - either automatically or manually - is fast, easy and cost-effective. Grommets form instant environmental barriers in both hot and cold temperatures
  
  a rapid seaI is created without the delay of lengthy cycles.
Comparable Materials for Resin Designs GT-1630 Sealing Strip

*See Terms of Use Below

Spec Engine^® Results
- GT-1600 Sealing Strip(Resin Designs)
  Both sides tacky; flame resistant; forms tight environmental seal; prevents corrosion; requires no heat or special tools; allows easy inspection or repair.
- GT-1620 Sealing Strip(Resin Designs)
  Rubber backed; one side tacky; flame resistant; forms tight environmental seal; prevents corrosion; requires no heat or special tools; allows easy inspection or repair.
- GT-1610 Sealing Strip(Resin Designs)
  Teflon backed; one side tacky; flame resistant; forms tight environmental seal; prevents corrosion; requires no heat or special tools; allows easy inspection or repair.
- Compare All