Application Type Seal, Gasket 1 Part or 2 Part 1 Part Material Form Grommet Industry Multiway connectors Manufacturer Resin Designs Chemistry Silicone Cure Method Pressure-Sensitive High Temperature Resistance (°C) 125 Low Temperature Resistance (°C) -40
Technical Data for Resin Designs GT-4201 Connector Seal Grommet
- Gasketing - Gasket
- Sealant - Seal
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Other - Grommet
- Connectors - Multiway connectors
- Industrial - Cable entries, Indoor equipment, Outdoor equipment
- Dispenser - Automatically
- Brush - Manually
- Pressure Sensitive (min) - Pressure-Sensitive
High Temperature Resistance (°C) 125 Low Temperature Resistance (°C) -40
Dielectric Strength (V/mil) 225 Thermal Conductivity (W/m°K) 0.20 Volume Resistivity (O) >1e11 (ohms/cm)
Shore OO Hardness 40 Flexibility Conformal
Specific Gravity 0.960 to 0.980 Coefficient of Thermal Expansion (CTE) 865 (Linear (micron/m °C or ppm )) Test Method
Shelf Life Details Because these are precured materials, there is no special storage condition or usage date required. The product should be stored in the original packaging under normal warehouse conditions to maintain the integrity of the packaging materials.
Best Practices for Resin Designs GT-4201 Connector Seal Grommet
Applying Dow Corning connector seal grommets – either automatically or manually – is fast, easy, and cost-effective. Grommets form instant environmental barriers in both hot and cold temperatures
a rapid seal is created without the delay of lengthy cure cycles.
Comparable Materials for Resin Designs GT-4201 Connector Seal Grommet
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.