- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
SPONSORED
Activator 56
Activator; 1-Part; Liquid; Non-CFC; Solvent;
A single component, non-CFC acetone solvent-based product, designed to promote the cure speed of Hernon Structural Adhesive/Sealants. Especially recommended for applications with passive metals, inert surfaces or where large gaps are present.;
Manufacturer:
Hernon
Color:
Light yellow
Viscosity (cPs):
Low
Loctite SF 7649
Activator; 1-Part; Liquid; Acetone; Solvent;
A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.;
Manufacturer:
Henkel
Viscosity (cPs):
Very Low; 2.00
ASC 10
Accelerator/ Activator; 1-Part; Liquid; Contains no ozone depleting agent; Accelerator;
Rapid drying accelerator for use with PERMA-LOK Anaerobic Adhesive/Sealants. Improves the cure on poorly mated parts, and increases the cure rate on less active substrates.;
Manufacturer:
PermaBond
Color:
Blue green; Blue Green
Cure Time (min):
1,440 min @ 23°C
CA-Activator Spray
Activator; 1-Part; Liquid; Ethyl Ester; Solvent;
A one part, accelerates the curing time of Weicon contact cyanoacrylate adhesives, applied to absorbing surfaces, like for example wood or foam etc.;
Loctite SF 7452
Accelerator; 1-Part; Liquid; Cyanoacrylate; None;
This accelerator, with aggressive cleaning properties, promotes the cure speed of all Loctite® brand cyanoacrylate adhesives.;
Manufacturer:
Henkel
Color:
Slightly amber; Transparent colorless
Viscosity (cPs):
Very low; 0.30 to 0.50
Cure Time (min):
<0.50 min @ 20°C
Loctite SF 7471
Activator; 1-Part; Liquid; Amine and Thiazole; Solvent;
A solvent-based primer that speeds the cure of all Loctite® brand anaerobic adhesives and ensures proper cure on inactive metals.;
Manufacturer:
Henkel
Viscosity (cPs):
Very Low; 2.00
6 Accelerator
Accelerate; 2-Part; Paste; Non-fammable; 2-Part Cure;
This accelerator mix-in curatives designed for use with Lord acrylic adhesives. When mixed with Lord 600 series acrylic adhesives, create adhesive systems that will bond a variety of prepared or unprepared metals and plastics.;
Manufacturer:
Parker Lord
Color:
Gray
Viscosity (cPs):
50,000 to 350,000
AH-40
Curing agent; 1-Part; Liquid; isocyanate-containing polymers; Curing Agent;
A unique, liquid curing agent for isocyanate-containing polymers. It was designed specifically to replace 4,4-Methylene-bis-(2-chloroaniline) [MbOCA], which has been listed as a suspected carcinogen, thus severely restricting its use and subsequent in-plant processing.;
Manufacturer:
Elantas (Altana)
Color:
Amber
Viscosity (cPs):
Low; 400
QFS16
Accelerator / Activator; 1-Part; Liquid; Cyanoacrylate; Accelerates;
Accelerates the cure of Cyanoacrylate adhesives, reduces frosting or fogging of adhesive, will not stress crack plastic surfaces.;
Manufacturer:
PermaBond
Color:
Colorless; Low-Bloom
Activator for RK-1300 & RK 1500
Activator; 1-Part; Liquid; Solvent based; Room Temperature;
A one part, very thin liquid, colourless, transparent activator for porous or passive surfaces (chrome, nickel etc).;
Manufacturer:
WEICON
Color:
Colourless; Transparent
Viscosity (cPs):
Very thin
Loctite SF 7387
Activator; 1-Part; Liquid; Toughened; Solvent;
Designed to initiate the cure of Loctite toughened acrylic adhesives.;
Manufacturer:
Henkel
Color:
Light Amber; Transparent yellow; Transparent yellow
Viscosity (cPs):
Very Low; 1.00 to 2.00
Activator 56
Activator; 1-Part; Liquid; Non-CFC; Solvent
A single component, non-CFC acetone solvent-based product, designed to promote the cure speed of Hernon Structural Adhesive/Sealants. Especially recommended for applications with passive metals, inert surfaces or where large gaps are present.
Manufacturer: Hernon
Color: Light yellow
Viscosity (cPs): Low
Loctite SF 7649
Activator; 1-Part; Liquid; Acetone; Solvent
A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.
Manufacturer: Henkel
Viscosity (cPs): Very Low; 2.00
ASC 10
Accelerator/ Activator; 1-Part; Liquid; Contains no ozone depleting agent; Accelerator
Rapid drying accelerator for use with PERMA-LOK Anaerobic Adhesive/Sealants. Improves the cure on poorly mated parts, and increases the cure rate on less active substrates.
Manufacturer: PermaBond
Color: Blue green; Blue Green
Cure Time (min): 1,440 min @ 23°C
CA-Activator Spray
Activator; 1-Part; Liquid; Ethyl Ester; Solvent
A one part, accelerates the curing time of Weicon contact cyanoacrylate adhesives, applied to absorbing surfaces, like for example wood or foam etc.
Manufacturer: WEICON
Color: Black
Loctite SF 7452
Accelerator; 1-Part; Liquid; Cyanoacrylate; None
This accelerator, with aggressive cleaning properties, promotes the cure speed of all Loctite® brand cyanoacrylate adhesives.
Manufacturer: Henkel
Color: Slightly amber; Transparent colorless
Viscosity (cPs): Very low; 0.30 to 0.50
Cure Time (min): <0.50 min @ 20°C
Loctite SF 7471
Activator; 1-Part; Liquid; Amine and Thiazole; Solvent
A solvent-based primer that speeds the cure of all Loctite® brand anaerobic adhesives and ensures proper cure on inactive metals.
Manufacturer: Henkel
Viscosity (cPs): Very Low; 2.00
6 Accelerator
Accelerate; 2-Part; Paste; Non-fammable; 2-Part Cure
This accelerator mix-in curatives designed for use with Lord acrylic adhesives. When mixed with Lord 600 series acrylic adhesives, create adhesive systems that will bond a variety of prepared or unprepared metals and plastics.
AH-40
Curing agent; 1-Part; Liquid; isocyanate-containing polymers; Curing Agent
A unique, liquid curing agent for isocyanate-containing polymers. It was designed specifically to replace 4,4-Methylene-bis-(2-chloroaniline) [MbOCA], which has been listed as a suspected carcinogen, thus severely restricting its use and subsequent in-plant processing.
Manufacturer: Elantas (Altana)
Color: Amber
Viscosity (cPs): Low; 400
QFS16
Accelerator / Activator; 1-Part; Liquid; Cyanoacrylate; Accelerates
Accelerates the cure of Cyanoacrylate adhesives, reduces frosting or fogging of adhesive, will not stress crack plastic surfaces.
Activator for RK-1300 & RK 1500
Activator; 1-Part; Liquid; Solvent based; Room Temperature
A one part, very thin liquid, colourless, transparent activator for porous or passive surfaces (chrome, nickel etc).
Manufacturer: WEICON
Color: Colourless; Transparent
Viscosity (cPs): Very thin
Loctite SF 7387
Activator; 1-Part; Liquid; Toughened; Solvent
Designed to initiate the cure of Loctite toughened acrylic adhesives.
Manufacturer: Henkel
Color: Light Amber; Transparent yellow; Transparent yellow
Viscosity (cPs): Very Low; 1.00 to 2.00
Application Type
Color
Viscosity
(cPs)
Cure Time
(min)
Description
Activator; Primer
Light yellow
Low
A single component, non-CFC acetone solvent-based product, designed to promote the cure speed of Hernon Structural Adhesive/Sealants. Especially recommended for applications with passive metals, inert surfaces or where large gaps are present.
Activator; Primer
Very Low; 2.00
A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.
Accelerator/ Activator; For making form-in-place gaskets; Substrate Cleaner
Blue green; Blue Green
1,440 min @ 23°C
Rapid drying accelerator for use with PERMA-LOK Anaerobic Adhesive/Sealants. Improves the cure on poorly mated parts, and increases the cure rate on less active substrates.
Accelerate; Activator
Black
A one part, accelerates the curing time of Weicon contact cyanoacrylate adhesives, applied to absorbing surfaces, like for example wood or foam etc.
Accelerator
Slightly amber; Transparent colorless
Very low; 0.30 to 0.50
<0.50 min @ 20°C
This accelerator, with aggressive cleaning properties, promotes the cure speed of all Loctite® brand cyanoacrylate adhesives.
Activator; Primer
Very Low; 2.00
A solvent-based primer that speeds the cure of all Loctite® brand anaerobic adhesives and ensures proper cure on inactive metals.
Accelerate
Gray
50,000 to 350,000
This accelerator mix-in curatives designed for use with Lord acrylic adhesives. When mixed with Lord 600 series acrylic adhesives, create adhesive systems that will bond a variety of prepared or unprepared metals and plastics.
Curing agent
Amber
Low; 400
A unique, liquid curing agent for isocyanate-containing polymers. It was designed specifically to replace 4,4-Methylene-bis-(2-chloroaniline) [MbOCA], which has been listed as a suspected carcinogen, thus severely restricting its use and subsequent in-plant processing.
Accelerator / Activator
Colorless; Low-Bloom
Accelerates the cure of Cyanoacrylate adhesives, reduces frosting or fogging of adhesive, will not stress crack plastic surfaces.
Activator
Colourless; Transparent
Very thin
A one part, very thin liquid, colourless, transparent activator for porous or passive surfaces (chrome, nickel etc).
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
WEICON Activator for RK-1300 & RK-1500 100 g WEICON Activator for RK-1300 & RK-1500 1 L
Activator
Light Amber; Transparent yellow; Transparent yellow
Very Low; 1.00 to 2.00
Designed to initiate the cure of Loctite toughened acrylic adhesives.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
