• Over 150 Material Manufacturers
  • Updated & Quality Checked Data

Advanced Search

Key Specs
Enamel
Manufacturer
Industry
Chemistry
Substrate
More Filters

160 Coverall Tan Blockout Enamel

Enamel; 1-Part; Liquid; Acetone; Solvent;
An excellent box cover-up that is fast drying, waterproof, and will not rub off, once dry. Prevents bleed through of old labels and stenciling. Does not contain chlorofluorocarbons or ozone depleting chemicals.;

Rust Tough Acrylic Water-Based Liquid Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent;
This advanced, free-of-lead hazard coating provides excellent gloss, superior durability and one-coat coverage. Can be applied directly to new or clean metal without a primer. Fast dry times, easy application and long-lasting color retention make Rust Tough the unparalleled choice for rust protection.;

Rust Tough Acrylic Alkyd Liquid Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent;
High-solids maintenance coating. One coat provides mirror-like gloss finish and long-lasting protection against corrosion/ Excellent color retention that resists fading with outstanding durability. Ideal for interior or exterior applications. Direct-to-metal on new and clean substrates. Hard finish resists chipping and peeling. Free-of-lead hazards and no heavy metals. Acceptable for use in federally-inspected meat and poultry plant.;

Tough Coat Acrylic Alkyd Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent;
Tough Coat provides the ultimate in durability and protective finishes. This high-solids formula ensures maximum coverage and performance.;
Manufacturer: Sherwin Williams
Chemical Resistance: Oil Resistance (Passes)

SB-6-665 Red Epoxy Insulating Enamel

Enamel; 1-Part; Liquid; Epoxy; Solvent;
Ideal for coating end turns on electrical windings exposed to extreme moisture and corrosive conditions. Outstanding chemical-resistance properties.;

Tough Coat Primers

Enamel; 1-Part; Liquid; Acrylic; Solvent;
Available in control, sandable and inhibitor primers, excellent when primer is used in conjunction with the Tough Coat® acrylic paints.;

Iron Guard DTM Acrylic Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent;
A high gloss, 100% acrylic, waterborne, corrosion resistant coating. Offers superior rust protection in a direct to metal, waterborne acrylic and excellent gloss retention. Low VOC. Direct to new & clean metal without a primer. Chemical resistant, fast drying. Outstanding early moisture resistance. Flash rust/early rust resistant. Corrosion resistant, low odor, outstanding adhesion.;

Rust Tough Aerosol

Enamel; 1-Part; Aerosol; Acrylic; Solvent;
Complete coverage with one coat. Dries to touch in 25 minutes; dries to handle in 1 hour. Superior appearance and color retention. Ideal for small touch-up jobs, painting irregular shapes or covering hard-to-reach areas. For both indoor and outdoor use. Tough, high gloss finish resists chipping and peeling.;

Tough Coat Fluorescent & I.D. Fluorescent

Enamel; 1-Part; Liquid; Acrylic; Solvent;
Fluorescent orange, red and electric green available, excellent marking characteristics.;

Tough Coat High Heat Paint

Enamel; 1-Part; Liquid; Acrylic; Solvent;
Available in high-heat black and high-heat aluminum.;

160 Coverall Tan Blockout Enamel

Enamel; 1-Part; Liquid; Acetone; Solvent
An excellent box cover-up that is fast drying, waterproof, and will not rub off, once dry. Prevents bleed through of old labels and stenciling. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell

Package Sizes

Tan Black Spray

Rust Tough Acrylic Water-Based Liquid Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent
This advanced, free-of-lead hazard coating provides excellent gloss, superior durability and one-coat coverage. Can be applied directly to new or clean metal without a primer. Fast dry times, easy application and long-lasting color retention make Rust Tough the unparalleled choice for rust protection.
Manufacturer: Sherwin Williams

Rust Tough Acrylic Alkyd Liquid Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent
High-solids maintenance coating. One coat provides mirror-like gloss finish and long-lasting protection against corrosion/ Excellent color retention that resists fading with outstanding durability. Ideal for interior or exterior applications. Direct-to-metal on new and clean substrates. Hard finish resists chipping and peeling. Free-of-lead hazards and no heavy metals. Acceptable for use in federally-inspected meat and poultry plant.
Manufacturer: Sherwin Williams

Tough Coat Acrylic Alkyd Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent
Tough Coat provides the ultimate in durability and protective finishes. This high-solids formula ensures maximum coverage and performance.
Manufacturer: Sherwin Williams
Chemical Resistance: Oil Resistance (Passes)

SB-6-665 Red Epoxy Insulating Enamel

Enamel; 1-Part; Liquid; Epoxy; Solvent
Ideal for coating end turns on electrical windings exposed to extreme moisture and corrosive conditions. Outstanding chemical-resistance properties.
Manufacturer: Sherwin Williams

Tough Coat Primers

Enamel; 1-Part; Liquid; Acrylic; Solvent
Available in control, sandable and inhibitor primers, excellent when primer is used in conjunction with the Tough Coat® acrylic paints.
Manufacturer: Sherwin Williams

Iron Guard DTM Acrylic Enamel

Enamel; 1-Part; Liquid; Acrylic; Solvent
A high gloss, 100% acrylic, waterborne, corrosion resistant coating. Offers superior rust protection in a direct to metal, waterborne acrylic and excellent gloss retention. Low VOC. Direct to new & clean metal without a primer. Chemical resistant, fast drying. Outstanding early moisture resistance. Flash rust/early rust resistant. Corrosion resistant, low odor, outstanding adhesion.
Manufacturer: Sherwin Williams

Rust Tough Aerosol

Enamel; 1-Part; Aerosol; Acrylic; Solvent
Complete coverage with one coat. Dries to touch in 25 minutes; dries to handle in 1 hour. Superior appearance and color retention. Ideal for small touch-up jobs, painting irregular shapes or covering hard-to-reach areas. For both indoor and outdoor use. Tough, high gloss finish resists chipping and peeling.
Manufacturer: Sherwin Williams

Package Sizes

15 oz Aerosol

Tough Coat Fluorescent & I.D. Fluorescent

Enamel; 1-Part; Liquid; Acrylic; Solvent
Fluorescent orange, red and electric green available, excellent marking characteristics.
Manufacturer: Sherwin Williams

Tough Coat High Heat Paint

Enamel; 1-Part; Liquid; Acrylic; Solvent
Available in high-heat black and high-heat aluminum.
Manufacturer: Sherwin Williams
Application Type
Chemical Resistance
1 Part or 2 Part
Material Form
Description
160 Coverall Tan Blockout Enamel
Camie Campbell
Enamel; Coat
1-Part
Liquid
An excellent box cover-up that is fast drying, waterproof, and will not rub off, once dry. Prevents bleed through of old labels and stenciling. Does not contain chlorofluorocarbons or ozone depleting chemicals.
View Datasheet
Contact Rep

Interested in Package Size:

Tan Black Spray
Rust Tough Acrylic Water-Based Liquid Enamel
Sherwin Williams
Enamel
1-Part
Liquid
This advanced, free-of-lead hazard coating provides excellent gloss, superior durability and one-coat coverage. Can be applied directly to new or clean metal without a primer. Fast dry times, easy application and long-lasting color retention make Rust Tough the unparalleled choice for rust protection.
Rust Tough Acrylic Alkyd Liquid Enamel
Sherwin Williams
Enamel
1-Part
Liquid
High-solids maintenance coating. One coat provides mirror-like gloss finish and long-lasting protection against corrosion/ Excellent color retention that resists fading with outstanding durability. Ideal for interior or exterior applications. Direct-to-metal on new and clean substrates. Hard finish resists chipping and peeling. Free-of-lead hazards and no heavy metals. Acceptable for use in federally-inspected meat and poultry plant.
Tough Coat Acrylic Alkyd Enamel
Sherwin Williams
Enamel
Oil Resistance (Passes)
1-Part
Liquid
Tough Coat provides the ultimate in durability and protective finishes. This high-solids formula ensures maximum coverage and performance.
SB-6-665 Red Epoxy Insulating Enamel
Sherwin Williams
Enamel; Varnish
1-Part
Liquid
Ideal for coating end turns on electrical windings exposed to extreme moisture and corrosive conditions. Outstanding chemical-resistance properties.
Tough Coat Primers
Sherwin Williams
Enamel
1-Part
Liquid
Available in control, sandable and inhibitor primers, excellent when primer is used in conjunction with the Tough Coat® acrylic paints.
Iron Guard DTM Acrylic Enamel
Sherwin Williams
Enamel
1-Part
Liquid
A high gloss, 100% acrylic, waterborne, corrosion resistant coating. Offers superior rust protection in a direct to metal, waterborne acrylic and excellent gloss retention. Low VOC. Direct to new & clean metal without a primer. Chemical resistant, fast drying. Outstanding early moisture resistance. Flash rust/early rust resistant. Corrosion resistant, low odor, outstanding adhesion.
Rust Tough Aerosol
Sherwin Williams
Enamel
1-Part
Aerosol
Complete coverage with one coat. Dries to touch in 25 minutes; dries to handle in 1 hour. Superior appearance and color retention. Ideal for small touch-up jobs, painting irregular shapes or covering hard-to-reach areas. For both indoor and outdoor use. Tough, high gloss finish resists chipping and peeling.
View Datasheet
Contact Rep

Interested in Package Size:

15 oz Aerosol
Tough Coat Fluorescent & I.D. Fluorescent
Sherwin Williams
Enamel
1-Part
Liquid
Fluorescent orange, red and electric green available, excellent marking characteristics.
Tough Coat High Heat Paint
Sherwin Williams
Enamel; Paint
1-Part
Liquid
Available in high-heat black and high-heat aluminum.