Advanced Search
Gluespec's goal is to help you build better products by curating a comprehensive and quality-tested database of adhesive materials. Your research goals demand that Gluespec does not limit the number of manufacturers or materials in its database. Data is quality-checked and updated as needed when new data sheets or key specs are released.
Welcome to the Gluespec Grids. Let’s find you the material that you need!
1
Enter your technical requirements into the "Guide Me" tool or the Advanced Search filters below2
Compare materials side-by-side or get a detailed view of their data sheets3
Order samples or request a quote for the materials you need. *Note* our experts are available throughout the whole process
Use the filters or the Guide Me tool above the grid to narrow down your results
Once you have 4 or fewer results, use compare view to decide which material to sample
Request a quote or sample to test in your project
A1000 Dry Lubricant Release Agent
Lubricate; 1-Part; Liquid; Acetone; Solvent;
A PTFE dispersion of a white, waxy, low molecular weight polymer. It leaves a fine dry film to produce a slick, friction-free surface between line and unlike substrates. Recommended when a wet film lubricant may attract dust and dirt. Will not dissolve in solvent or melt below 450°F. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
High Temperature Resistance (°C):
232
Molykote 33 Medium Extreme Low Temperature Grease
Grease; 1-Part; Grease; Lithium soap; None;
Grease for use under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds.;
Manufacturer:
Dupont
Viscosity (cPs):
100 (mm2/s)
High Temperature Resistance (°C):
180
888 Silicone Release Agent and Lubricant
Lubricate; 1-Part; Liquid; Silicone; Solvent;
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
Viscosity (cPs):
Medium
High Temperature Resistance (°C):
260
55 O-Ring Lubricant
Lubricate; 1-Part; Grease; Silicone; None;
Soft silicone-based grease, slightly swells rubber for better sealing, oxidation resistant and serviceable over a wide temperature range.;
Manufacturer:
Dow
Viscosity (cPs):
100 (mm2/s)
High Temperature Resistance (°C):
175
Molykote 44 Light High Temperature Grease
Grease; 1-Part; Grease; Lithium soap; None;
• Low evaporation • Superior oxidation resistance • Broad range of service temperatures • Superior low-temperature characteristics • Compatible with most plastics • Water-resistant.;
Manufacturer:
Dupont
Viscosity (cPs):
125 (mm2/s)
High Temperature Resistance (°C):
200; 204
Molykote Z Powder
Grease; 1-Part; Powder; Molybdenum disulfide; None;
A solid lubricant that lubricates metal surfaces in many difficult and extreme environments. It has Resistant to oxidation, Extreme pressure resistance, Wide service-temperature range and Molybdenum disulfide.;
Manufacturer:
Dupont
Viscosity (cPs):
Free-flowing
High Temperature Resistance (°C):
400
1080 Paintable Mold Release
Lubricate; 1-Part; Liquid; Hydrocarbon; Solvent;
A very popular, all-purpose paintable release agent. Economical to use, it eliminates costly cleanups, doesn't build up, and doesn't interfere with painting, hot stamping, vacuum metalizing or gluing. Can be used on most substrates, including rubber, acrylics, polyesters, polystyrenes and cellulose. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
High Temperature Resistance (°C):
260
Molykote 1000 Solid Lubricant Paste
Lubricant; 1-Part; Paste; Contains no lead; None;
Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650°C (1202°F) with high load carrying capacity and goof corrosion protection.;
Manufacturer:
Dupont
High Temperature Resistance (°C):
650
Silicone Lubricant
Lubricate; 1-Part; Aerosol; Silicone; Air dry;
Lubricates cutting tools and tables cutting • Helps prevent buildup of glues, wax, inks, paints • Won’t stain or become gummy • FDA listed ingredients • Temperature resistance 350°F;
Manufacturer:
3M
High Temperature Resistance (°C):
<177
G-n Metal Assembly Paste
Lubricate; 1-Part; Paste; Mineral Oil; None;
Composition of solid lubricants in mineral oil; excellent protection against fretting wear and corrosion, extends service life, low friction and reduces the force required for disassembly of threaded fasteners.;
Manufacturer:
Dow
Viscosity (cPs):
Buttery; Grainy
High Temperature Resistance (°C):
121; 399
A1000 Dry Lubricant Release Agent
Lubricate; 1-Part; Liquid; Acetone; Solvent
A PTFE dispersion of a white, waxy, low molecular weight polymer. It leaves a fine dry film to produce a slick, friction-free surface between line and unlike substrates. Recommended when a wet film lubricant may attract dust and dirt. Will not dissolve in solvent or melt below 450°F. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Molykote 33 Medium Extreme Low Temperature Grease
Grease; 1-Part; Grease; Lithium soap; None
Grease for use under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds.
Manufacturer: Dupont
Viscosity (cPs): 100 (mm2/s)
High Temperature Resistance (°C): 180
888 Silicone Release Agent and Lubricant
Lubricate; 1-Part; Liquid; Silicone; Solvent
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell
Viscosity (cPs): Medium
High Temperature Resistance (°C): 260
Package Sizes
Spray
55 O-Ring Lubricant
Lubricate; 1-Part; Grease; Silicone; None
Soft silicone-based grease, slightly swells rubber for better sealing, oxidation resistant and serviceable over a wide temperature range.
Manufacturer: Dow
Viscosity (cPs): 100 (mm2/s)
High Temperature Resistance (°C): 175
Molykote 44 Light High Temperature Grease
Grease; 1-Part; Grease; Lithium soap; None
• Low evaporation • Superior oxidation resistance • Broad range of service temperatures • Superior low-temperature characteristics • Compatible with most plastics • Water-resistant.
Manufacturer: Dupont
Viscosity (cPs): 125 (mm2/s)
High Temperature Resistance (°C): 200; 204
Molykote Z Powder
Grease; 1-Part; Powder; Molybdenum disulfide; None
A solid lubricant that lubricates metal surfaces in many difficult and extreme environments. It has Resistant to oxidation, Extreme pressure resistance, Wide service-temperature range and Molybdenum disulfide.
Manufacturer: Dupont
Viscosity (cPs): Free-flowing
High Temperature Resistance (°C): 400
1080 Paintable Mold Release
Lubricate; 1-Part; Liquid; Hydrocarbon; Solvent
A very popular, all-purpose paintable release agent. Economical to use, it eliminates costly cleanups, doesn't build up, and doesn't interfere with painting, hot stamping, vacuum metalizing or gluing. Can be used on most substrates, including rubber, acrylics, polyesters, polystyrenes and cellulose. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Molykote 1000 Solid Lubricant Paste
Lubricant; 1-Part; Paste; Contains no lead; None
Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650°C (1202°F) with high load carrying capacity and goof corrosion protection.
Silicone Lubricant
Lubricate; 1-Part; Aerosol; Silicone; Air dry
Lubricates cutting tools and tables cutting • Helps prevent buildup of glues, wax, inks, paints • Won’t stain or become gummy • FDA listed ingredients • Temperature resistance 350°F
G-n Metal Assembly Paste
Lubricate; 1-Part; Paste; Mineral Oil; None
Composition of solid lubricants in mineral oil; excellent protection against fretting wear and corrosion, extends service life, low friction and reduces the force required for disassembly of threaded fasteners.
Manufacturer: Dow
Viscosity (cPs): Buttery; Grainy
High Temperature Resistance (°C): 121; 399
Application Type
Chemistry
Viscosity (cPs)
High Temperature Resistance (°C)
Description
Lubricate; Gaskets; Release Agent
Acetone; Polymer
232
A PTFE dispersion of a white, waxy, low molecular weight polymer. It leaves a fine dry film to produce a slick, friction-free surface between line and unlike substrates. Recommended when a wet film lubricant may attract dust and dirt. Will not dissolve in solvent or melt below 450°F. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Grease
Lithium soap; Silicone oil
100 (mm2/s)
180
Grease for use under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds.
Lubricate; Release Agent
Acetone; Hexane; Silicone
Medium
260
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Lubricate; Seal
Silicone
100 (mm2/s)
175
Soft silicone-based grease, slightly swells rubber for better sealing, oxidation resistant and serviceable over a wide temperature range.
Grease
Lithium soap; Silicone oil
125 (mm2/s)
200; 204
• Low evaporation • Superior oxidation resistance • Broad range of service temperatures • Superior low-temperature characteristics • Compatible with most plastics • Water-resistant.
Grease
Molybdenum disulfide
Free-flowing
400
A solid lubricant that lubricates metal surfaces in many difficult and extreme environments. It has Resistant to oxidation, Extreme pressure resistance, Wide service-temperature range and Molybdenum disulfide.
Lubricate; Mold Release; Release
Hydrocarbon
260
A very popular, all-purpose paintable release agent. Economical to use, it eliminates costly cleanups, doesn't build up, and doesn't interfere with painting, hot stamping, vacuum metalizing or gluing. Can be used on most substrates, including rubber, acrylics, polyesters, polystyrenes and cellulose. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Lubricant
Contains no lead; Contains no nickel; Mineral oil; Powdered metal; Thickener
650
Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650°C (1202°F) with high load carrying capacity and goof corrosion protection.
Lubricate; Maintain; Repair
Silicone
<177
Lubricates cutting tools and tables cutting • Helps prevent buildup of glues, wax, inks, paints • Won’t stain or become gummy • FDA listed ingredients • Temperature resistance 350°F
Lubricate
Mineral Oil; Molybdenum disulfide
Buttery; Grainy
121; 399
Composition of solid lubricants in mineral oil; excellent protection against fretting wear and corrosion, extends service life, low friction and reduces the force required for disassembly of threaded fasteners.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
