- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
A1000 Dry Lubricant Release Agent
Release Agent; 1-Part; Liquid; Polymer; Solvent;
A PTFE dispersion of a white, waxy, low molecular weight polymer. It leaves a fine dry film to produce a slick, friction-free surface between line and unlike substrates. Recommended when a wet film lubricant may attract dust and dirt. Will not dissolve in solvent or melt below 450°F. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
888 Silicone Release Agent and Lubricant
Release Agent; 1-Part; Liquid; Silicone; Solvent;
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
Molykote 316 Silicone Release Spray
Release agent; 1-Part; Aerosol; Silicone; Heat;
• A heat-stable, silicone anti-stick agent • Release agent for many food and industrial applications • Meets FDA 21 CFR 175.300 regulations • Heat-stable silicone compound.;
Manufacturer:
Dupont
1080 Paintable Mold Release
Release; 1-Part; Liquid; Hydrocarbon; Solvent;
A very popular, all-purpose paintable release agent. Economical to use, it eliminates costly cleanups, doesn't build up, and doesn't interfere with painting, hot stamping, vacuum metalizing or gluing. Can be used on most substrates, including rubber, acrylics, polyesters, polystyrenes and cellulose. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
666 Heavy Duty Grease and Release Agent
Release Agent; 1-Part; Aerosol; Hexane; Solvent;
A 6% silicone that produces a heavy, grease-like coating that clings to surfaces, reduces friction, prevents sticking, repels water, and unaffected by temperatures -40°F to 500°F. Provides long lasting lubrication and prevents corrosion. Active ingredients comply with FDA and USDA regulations. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
MR-5002
Release Agent; 1-Part; Liquid; Silicone; Heat;
A low viscosity, silicone based liquid mold release and parting agent. It gives excellent release characteristics for simple and complex potting, casting, and molding operations.;
Manufacturer:
Elantas (Altana)
Mould Release Agent Wax P 500
Mould Release Agent; 1-Part; Liquid; Wax; Solvent;
A one part component is a release agent on a waxy basis for epoxy resins and polyurethanes. It is especially suitable for release processes from rough and/or porous surfaces.;
Manufacturer:
WEICON
7 Release Compound
Release compound; 1-Part; Grease; Dimethyl silicone; None;
• Dimethyl silicone compound for a variety of lubrication and protection applications • Practically nonvolatile • Moisture-resistant • Electrically insulating • Resistant to oxidation;
Manufacturer:
Dow
Chemical Resistance:
Air; Alkalines; Dilute acids; Mineral oils; Most aqueous solutions; Vegetable oils; Water washout
Mould Release Agent Liquid F 1000
Mould Release Agent; 1-Part; Liquid; Waxy; Solvent;
A release agent on a waxy basis for epoxy resins and polyurethanes. It is especially suitable for release processes from smooth and non-absorbing surfaces.;
Manufacturer:
WEICON
100 Heavy Duty Silicone Lubricant and Release Agent
Release Agent; 1-Part; Liquid; Silicone; Solvent;
A multi-purpose, high viscosity 6% silicone spray for general maintenance applications. Used to prevent friction or sticking, also an excellent product to prevent the buildup of ink or adhesives and to prevent the formation of rust. Odorless and stainless in most applications. Repels moisture and eliminates friction and squeaks. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
A1000 Dry Lubricant Release Agent
Release Agent; 1-Part; Liquid; Polymer; Solvent
A PTFE dispersion of a white, waxy, low molecular weight polymer. It leaves a fine dry film to produce a slick, friction-free surface between line and unlike substrates. Recommended when a wet film lubricant may attract dust and dirt. Will not dissolve in solvent or melt below 450°F. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell
Package Sizes
Spray
888 Silicone Release Agent and Lubricant
Release Agent; 1-Part; Liquid; Silicone; Solvent
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell
Package Sizes
Spray
Molykote 316 Silicone Release Spray
Release agent; 1-Part; Aerosol; Silicone; Heat
• A heat-stable, silicone anti-stick agent • Release agent for many food and industrial applications • Meets FDA 21 CFR 175.300 regulations • Heat-stable silicone compound.
Manufacturer: Dupont
1080 Paintable Mold Release
Release; 1-Part; Liquid; Hydrocarbon; Solvent
A very popular, all-purpose paintable release agent. Economical to use, it eliminates costly cleanups, doesn't build up, and doesn't interfere with painting, hot stamping, vacuum metalizing or gluing. Can be used on most substrates, including rubber, acrylics, polyesters, polystyrenes and cellulose. Does not contain chlorofluorocarbons or ozone depleting chemicals.
666 Heavy Duty Grease and Release Agent
Release Agent; 1-Part; Aerosol; Hexane; Solvent
A 6% silicone that produces a heavy, grease-like coating that clings to surfaces, reduces friction, prevents sticking, repels water, and unaffected by temperatures -40°F to 500°F. Provides long lasting lubrication and prevents corrosion. Active ingredients comply with FDA and USDA regulations. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell
Package Sizes
Spray
MR-5002
Release Agent; 1-Part; Liquid; Silicone; Heat
A low viscosity, silicone based liquid mold release and parting agent. It gives excellent release characteristics for simple and complex potting, casting, and molding operations.
Mould Release Agent Wax P 500
Mould Release Agent; 1-Part; Liquid; Wax; Solvent
A one part component is a release agent on a waxy basis for epoxy resins and polyurethanes. It is especially suitable for release processes from rough and/or porous surfaces.
Manufacturer: WEICON
7 Release Compound
Release compound; 1-Part; Grease; Dimethyl silicone; None
• Dimethyl silicone compound for a variety of lubrication and protection applications • Practically nonvolatile • Moisture-resistant • Electrically insulating • Resistant to oxidation
Manufacturer: Dow
Chemical Resistance: Air; Alkalines; Dilute acids; Mineral oils; Most aqueous solutions; Vegetable oils; Water washout
Mould Release Agent Liquid F 1000
Mould Release Agent; 1-Part; Liquid; Waxy; Solvent
A release agent on a waxy basis for epoxy resins and polyurethanes. It is especially suitable for release processes from smooth and non-absorbing surfaces.
Manufacturer: WEICON
100 Heavy Duty Silicone Lubricant and Release Agent
Release Agent; 1-Part; Liquid; Silicone; Solvent
A multi-purpose, high viscosity 6% silicone spray for general maintenance applications. Used to prevent friction or sticking, also an excellent product to prevent the buildup of ink or adhesives and to prevent the formation of rust. Odorless and stainless in most applications. Repels moisture and eliminates friction and squeaks. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell
Package Sizes
Spray
Application Type
Chemical Resistance
1 Part or 2 Part
Material Form
Description
Release Agent; Gaskets; Lubricate
1-Part
Liquid
A PTFE dispersion of a white, waxy, low molecular weight polymer. It leaves a fine dry film to produce a slick, friction-free surface between line and unlike substrates. Recommended when a wet film lubricant may attract dust and dirt. Will not dissolve in solvent or melt below 450°F. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Release Agent; Lubricate
1-Part
Liquid
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Release agent
1-Part
Aerosol
• A heat-stable, silicone anti-stick agent • Release agent for many food and industrial applications • Meets FDA 21 CFR 175.300 regulations • Heat-stable silicone compound.
Release; Lubricate; Mold Release
1-Part
Liquid
A very popular, all-purpose paintable release agent. Economical to use, it eliminates costly cleanups, doesn't build up, and doesn't interfere with painting, hot stamping, vacuum metalizing or gluing. Can be used on most substrates, including rubber, acrylics, polyesters, polystyrenes and cellulose. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Release Agent; Lubricate; Repair
1-Part
Aerosol
A 6% silicone that produces a heavy, grease-like coating that clings to surfaces, reduces friction, prevents sticking, repels water, and unaffected by temperatures -40°F to 500°F. Provides long lasting lubrication and prevents corrosion. Active ingredients comply with FDA and USDA regulations. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Release Agent
1-Part
Liquid
A low viscosity, silicone based liquid mold release and parting agent. It gives excellent release characteristics for simple and complex potting, casting, and molding operations.
Mould Release Agent
1-Part
Liquid
A one part component is a release agent on a waxy basis for epoxy resins and polyurethanes. It is especially suitable for release processes from rough and/or porous surfaces.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
WEICON Mould Release Agent Wax P 500 150 g WEICON Mould Release Agent Wax P 500 500 g
Release compound; Lubrication
Air; Alkalines; Dilute acids; Mineral oils; Most aqueous solutions; Vegetable oils; Water washout
1-Part
Grease
• Dimethyl silicone compound for a variety of lubrication and protection applications • Practically nonvolatile • Moisture-resistant • Electrically insulating • Resistant to oxidation
Mould Release Agent
1-Part
Liquid
A release agent on a waxy basis for epoxy resins and polyurethanes. It is especially suitable for release processes from smooth and non-absorbing surfaces.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Mould Release Agent Liquid F 1000 250 ml Mould Release Agent Liquid F 1000 1 L
Release Agent; Lubricate
1-Part
Liquid
A multi-purpose, high viscosity 6% silicone spray for general maintenance applications. Used to prevent friction or sticking, also an excellent product to prevent the buildup of ink or adhesives and to prevent the formation of rust. Odorless and stainless in most applications. Repels moisture and eliminates friction and squeaks. Does not contain chlorofluorocarbons or ozone depleting chemicals.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
