- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
Loctite AA 363
Shallow potting; 1-Part; Liquid; Acrylic; Ultraviolet (UV) light;
Is designed for shallow potting and thin-film encapsulating of electronic assemblies. Acrylic, Urethane methacrylate, Transparent yellow liquid, One component - requires no mixing, Ultraviolet (UV) light,;
Manufacturer:
Henkel
Chemical Resistance:
1,1,1 Trichloroethane; Freon TA; Gasoline; Heat/Humidity 90% RH; Industrial methylated spirits; Solvent
Multi-Cure 921-GEL
Shallow Potting; 1-Part; Gel; No Nonreactive Solvents; UV Light Curing ;
Is designed for rapid bonding and shallow potting in a wide variety of substrates including metal, glass, ceramic, and thermoset or filled plastics.;
Manufacturer:
Dymax
Blank Ammunition Sealant 53162
Shallow potting applications; 1-Part; Liquid; Modified Acrylic Ester; UV curable;
A medium viscosity, UV and LED curable compound formulated to provide high performance, fast curing, coating and sealing of ammunition blank tips. This product is also used for shallow potting applications.;
Manufacturer:
Hernon
Multi-Cure 921-VT
Shallow Potting; 1-Part; Gel; Acrylated Urethane; Activator Cure;
Designed for rapid bonding and shallow potting in a wide variety of substrates including metal, glass, ceramic, and thermoset or filled plastics.;
Manufacturer:
Dymax
Silastic MS-4007 Moldable Silicone
Encapsulant; 2-Part; Liquid; Polydimethylsiloxane; Heat;
An optically clear, medium viscosity, high Shore A hardness, two-part, 1:1 ratio, fast heat curing optical molding resin for producing optical parts with good resistance to environmental aging.;
Manufacturer:
Dow
Ultrabond 758
Shallow potting applications; 1-Part; Liquid; Modified acrylic ester; UV curable;
A low viscosity self-leveling UV curable potting compound formulated to provide high performance, fast curing, coating and encapsulating of electronic components. This product is also used for shallow potting applications.;
Manufacturer:
Hernon
Elastosil RT 708
Potting; 1-Part; Liquid; Silicone rubber; Heat-curing;
A self-levelling, slightly thixotropic, one-part heat-curing silicone rubber for potting and coating applications. It shows very good adhesion to many substrates and long-term stability against weathering, moisture and UV light.
;
Manufacturer:
Wacker
FL250D Solder Paste
Potting; 1-Part; Paste; Solder;
A no-clean, air or nitrogen reflowable, solder paste specifically designed for automotive requirements, is compatible with post-soldering process chemicals, including conformal coatings and potting compounds.;
Manufacturer:
Kester
20-2162
Potting; 2-Part; Liquid; Urethane; 2-Part cure;
It is a unique high performance two component urethane system, is for demanding applications where flow control is necessary to limit mold leaking, seeping around cable entries and substrate wicking Outstanding durability.;
Manufacturer:
Epoxies Etc
AS1623
Shallow potting; 1-Part; Liquid; Silicone; Oxime cure;
A 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Oxime cure products which are solvent free.;
Manufacturer:
CHT
Loctite AA 363
Shallow potting; 1-Part; Liquid; Acrylic; Ultraviolet (UV) light
Is designed for shallow potting and thin-film encapsulating of electronic assemblies. Acrylic, Urethane methacrylate, Transparent yellow liquid, One component - requires no mixing, Ultraviolet (UV) light,
Manufacturer: Henkel
Chemical Resistance: 1,1,1 Trichloroethane; Freon TA; Gasoline; Heat/Humidity 90% RH; Industrial methylated spirits; Solvent
Multi-Cure 921-GEL
Shallow Potting; 1-Part; Gel; No Nonreactive Solvents; UV Light Curing
Is designed for rapid bonding and shallow potting in a wide variety of substrates including metal, glass, ceramic, and thermoset or filled plastics.
Manufacturer: Dymax
Blank Ammunition Sealant 53162
Shallow potting applications; 1-Part; Liquid; Modified Acrylic Ester; UV curable
A medium viscosity, UV and LED curable compound formulated to provide high performance, fast curing, coating and sealing of ammunition blank tips. This product is also used for shallow potting applications.
Manufacturer: Hernon
Multi-Cure 921-VT
Shallow Potting; 1-Part; Gel; Acrylated Urethane; Activator Cure
Designed for rapid bonding and shallow potting in a wide variety of substrates including metal, glass, ceramic, and thermoset or filled plastics.
Manufacturer: Dymax
Silastic MS-4007 Moldable Silicone
Encapsulant; 2-Part; Liquid; Polydimethylsiloxane; Heat
An optically clear, medium viscosity, high Shore A hardness, two-part, 1:1 ratio, fast heat curing optical molding resin for producing optical parts with good resistance to environmental aging.
Manufacturer: Dow
Ultrabond 758
Shallow potting applications; 1-Part; Liquid; Modified acrylic ester; UV curable
A low viscosity self-leveling UV curable potting compound formulated to provide high performance, fast curing, coating and encapsulating of electronic components. This product is also used for shallow potting applications.
Manufacturer: Hernon
Elastosil RT 708
Potting; 1-Part; Liquid; Silicone rubber; Heat-curing
A self-levelling, slightly thixotropic, one-part heat-curing silicone rubber for potting and coating applications. It shows very good adhesion to many substrates and long-term stability against weathering, moisture and UV light.
Manufacturer: Wacker
FL250D Solder Paste
Potting; 1-Part; Paste; Solder
A no-clean, air or nitrogen reflowable, solder paste specifically designed for automotive requirements, is compatible with post-soldering process chemicals, including conformal coatings and potting compounds.
Manufacturer: Kester
20-2162
Potting; 2-Part; Liquid; Urethane; 2-Part cure
It is a unique high performance two component urethane system, is for demanding applications where flow control is necessary to limit mold leaking, seeping around cable entries and substrate wicking Outstanding durability.
Manufacturer: Epoxies Etc
AS1623
Shallow potting; 1-Part; Liquid; Silicone; Oxime cure
A 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Oxime cure products which are solvent free.
Manufacturer: CHT
Package Sizes
310 ml cartridge
Application Type
Chemical Resistance
1 Part or 2 Part
Material Form
Description
Shallow potting; Encapsulating; Potting
1,1,1 Trichloroethane; Freon TA; Gasoline; Heat/Humidity 90% RH; Industrial methylated spirits; Solvent
1-Part
Liquid
Is designed for shallow potting and thin-film encapsulating of electronic assemblies. Acrylic, Urethane methacrylate, Transparent yellow liquid, One component - requires no mixing, Ultraviolet (UV) light,
Shallow Potting; Bonding ; Instant Adhesives; Potting
1-Part
Gel
Is designed for rapid bonding and shallow potting in a wide variety of substrates including metal, glass, ceramic, and thermoset or filled plastics.
Shallow potting applications; Coating; Sealant
1-Part
Liquid
A medium viscosity, UV and LED curable compound formulated to provide high performance, fast curing, coating and sealing of ammunition blank tips. This product is also used for shallow potting applications.
Shallow Potting; Bonding ; Potting
1-Part
Gel
Designed for rapid bonding and shallow potting in a wide variety of substrates including metal, glass, ceramic, and thermoset or filled plastics.
Encapsulant; Casting; Injection molding
2-Part
Liquid
An optically clear, medium viscosity, high Shore A hardness, two-part, 1:1 ratio, fast heat curing optical molding resin for producing optical parts with good resistance to environmental aging.
Shallow potting applications; Coating; Encapsulating; Potting
1-Part
Liquid
A low viscosity self-leveling UV curable potting compound formulated to provide high performance, fast curing, coating and encapsulating of electronic components. This product is also used for shallow potting applications.
Potting; Bond; Coating
1-Part
Liquid
A self-levelling, slightly thixotropic, one-part heat-curing silicone rubber for potting and coating applications. It shows very good adhesion to many substrates and long-term stability against weathering, moisture and UV light.
Potting; Coatings; Solder paste
1-Part
Paste
A no-clean, air or nitrogen reflowable, solder paste specifically designed for automotive requirements, is compatible with post-soldering process chemicals, including conformal coatings and potting compounds.
Potting; Adhesive; Sealant
2-Part
Liquid
It is a unique high performance two component urethane system, is for demanding applications where flow control is necessary to limit mold leaking, seeping around cable entries and substrate wicking Outstanding durability.
Shallow potting; Bond; Sealant
1-Part
Liquid
A 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Oxime cure products which are solvent free.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
