Engineered Custom Lubricants Christo-Lube MCG 153 Datasheet Engineered Custom Lubricants Christo-Lube MCG 153

Information provided by Gluespec
  • Description for Engineered Custom Lubricants Christo-Lube MCG 153

    Engineered Custom Lubricants Christo-Lube MCG 153 is a 1-Part None Thickener: PTFE Grease used to Lubricate Metals, Plastics and Plastic components

    *See Terms of Use Below

    Brand Christo-Lube
    Chemical Resistance Non-reactivity with harsh chemicals, Chemical Resistance: Non-reactivity with solvents, Chemical Resistance
    Application Type Grease
    1 Part or 2 Part 1-Part
    Material Form Grease
    Substrate Metals, Plastics, Elastomers, Plastic components
    Industry Used to lubricate plastic components typically found in automotive applications
    Manufacturer Engineered Custom Lubricants
    Chemistry Thickener: PTFE, PFPE
    Viscosity (cPs) Medium consistency, Smooth
    Color White
    Oxidation Resistance Outstanding stability with oxygen
    Four Ball Wear Test Method ASTM D2266 / DIN 51350-T5, 60 min 1200 RPM 75°C 40kgf, The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product, ASTM D2266 / DIN 51350-T5, Dynamic Coefficient of Friction (steel on steel), The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product
    High Temperature Resistance (°C) Operates under extreme temperature conditions, 260
    Low Temperature Resistance (°C) -30
    Four Ball Wear Test 0.783 (mm), 0.08
    Evaporation (%) >7, >3
    Key Specifications National Sanitation Foundation: Registered H1 by the NSF (156997)
  • Technical Data for Engineered Custom Lubricants Christo-Lube MCG 153

    Overview
    • Chemical Resistance
      • Chemical Resistance - Non-reactivity with harsh chemicals
      • Chemical Resistance : Relative Solvent Resistance - Non-reactivity with solvents
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Grease
    • Substrate
      • Elastomer - Elastomers
      • Metal - Metals
      • Plastic - Plastics, Plastic components
    • Industry
      • Automotive - Used to lubricate plastic components typically found in automotive applications
      • Industrial - Lubricating valve components, Lubricating regulator components
    • Chemistry
      • Other - Thickener: PTFE, PFPE
    • Cure Method
      • None
    • Color
      • White
    • Key Specifications
      • National Sanitation Foundation : H1 Rated - Registered H1 by the NSF (156997)
    • Brand
      • Christo-Lube
    Specifications
    Cure Specs
    Viscosity (cPs) Medium consistency, Smooth
    Material Resistance
    Oxidation Resistance Outstanding stability with oxygen
    Four Ball Wear Test Method ASTM D2266 / DIN 51350-T5, 60 min 1200 RPM 75°C 40kgf, The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product, ASTM D2266 / DIN 51350-T5, Dynamic Coefficient of Friction (steel on steel), The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product
    High Temperature Resistance (°C) Operates under extreme temperature conditions, 260 Test Method
    Low Temperature Resistance (°C) -30 Test Method
    Four Ball Wear Test 0.783 (mm), 0.08
    Other Properties
    Specific Gravity 1.990 Test Method
    Evaporation (%) >7, >3
  • Best Practices

    Best Practices information currently not available.
  • Comparable Materials for Engineered Custom Lubricants Christo-Lube MCG 153

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Lubricants 101

Read Article

Testing the effectiveness of surface treatments

Read Article

Lubricants In-depth: Grease

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
Operates under extreme temperature conditions
260°C Temperature Service, The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-30°C Temperature Service, The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product
Specific Gravity Test Methods
Specific Gravity Temperature Test Method
1.990 25°C CTM-2, The values stated in this Product Data Sheet are Typical Values and must not be used as QC Specifications for this product. Please contact the Global Technical Services department for QC specifications for this product