- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
Spectracron 111 Fast Dry Alkyd Non-Lift Primer
Primer; 1-Part; Liquid; Alkyd; Heat;
Recommended for industrial use on metal surfaces. Suitable applications include metal fabrication, castings, machinery and heavy equipment. Fast drying, contains no heavy metals.;
Manufacturer:
PPG Industries
Chemical Resistance:
Excellent salt spray performance; Good
Aquacron 835 Series
Primer; 1-Part; Liquid; Water-reducible alkyd; Heat;
Water-reducible alkyd performance primer is fast drying, interior/exterior primer intended for industrial use on bare metal surfaces where corrosion resistance is needed. It can be utilized across a wide variety of end use markets from office furniture to heavy machinery.;
Manufacturer:
PPG Industries
Chemical Resistance:
Excellent chemical resistance ; Excellent early water spot resistance; Salt spray
Corrosol 52962
Cleaner; 1-Part; Liquid; Mildly acidic ; None;
A mildly acidic cleaner and rinse additive designed to remove light oxides from ferrous metal surfaces. Aids in the removal of hydrolyzed salts to prevent in-process staining on pickled steel surfaces.;
Manufacturer:
PPG Industries
Ultrax LT8620
Cleaner; 1-Part; Liquid; Alkaline; Air dry;
A liquid alkaline cleaner developed for use in low temperature cleaning applications on multi-metal substrates.;
Manufacturer:
PPG Industries
Ultraguard ATP50F/50FR
Conversion coating; 2-Part; Liquid; Iron phosphate; 2-Part cure;
A low temperature iron phosphate for steel, galvanized steel and aluminum substrates prior to painting. It is designed for use after typical alkaline or neutral-based cleaners.;
Manufacturer:
PPG Industries
Spectracron 501 Series
Primer; 1-Part; Liquid; Low; Heat cure;
Low VOC single component primer recommended for industrial use on properly prepared metal surfaces. It can provide good filling properties and strong corrosion resistance.;
Manufacturer:
PPG Industries
Chemical Resistance:
Salt spray
Spectracron 701/702 Wash Primer
Wash primer; 2-Part; Liquid; Chromates; 2-Part Cure;
A surface pretreatment intended for direct application to bare metal surfaces. It is specifically designed to improve the adhesion of topcoats with or without primer applications.;
Manufacturer:
PPG Industries
Chemical Resistance:
Salt spray resistance: Fair
Aquacron MV398C Equipment Cleaner
Equipment cleaner; 1-Part; Liquid; 7.38 (lbs./gal.) Less water; None;
Recommended to be used for the cleanup of tools, spray equipment, paint lines, etc. that have been used to spray any of the Aquacron waterbased primers or topcoats. It may also be used as a surface cleaner prior to painting non porous surfaces.;
Manufacturer:
PPG Industries
Spectracron 591 w/ QAP592
Primer; 2-Part; Liquid; Epoxy; 2-Part cure;
Wet-on-wet epoxy primer is two-component, low VOC, corrosion resistant epoxy primers designed for properly prepared metal surfaces. Can be used over zinc rich primers, excellent flexibility.
;
Manufacturer:
PPG Industries
Chemical Resistance:
Salt spray
Spectracron 531 Series w/ QAP532
Primer; 2-Part; Liquid; Epoxy; 2-Part cure;
Two component primer recommended for use on properly prepared metal substrates where high build and smooth finishes are required. Properties include excellent adhesion, toughness and corrosion resistance.;
Manufacturer:
PPG Industries
Chemical Resistance:
Excellent; Salt spray
Spectracron 111 Fast Dry Alkyd Non-Lift Primer
Primer; 1-Part; Liquid; Alkyd; Heat
Recommended for industrial use on metal surfaces. Suitable applications include metal fabrication, castings, machinery and heavy equipment. Fast drying, contains no heavy metals.
Manufacturer: PPG Industries
Chemical Resistance: Excellent salt spray performance; Good
Aquacron 835 Series
Primer; 1-Part; Liquid; Water-reducible alkyd; Heat
Water-reducible alkyd performance primer is fast drying, interior/exterior primer intended for industrial use on bare metal surfaces where corrosion resistance is needed. It can be utilized across a wide variety of end use markets from office furniture to heavy machinery.
Manufacturer: PPG Industries
Chemical Resistance: Excellent chemical resistance ; Excellent early water spot resistance; Salt spray
Corrosol 52962
Cleaner; 1-Part; Liquid; Mildly acidic ; None
A mildly acidic cleaner and rinse additive designed to remove light oxides from ferrous metal surfaces. Aids in the removal of hydrolyzed salts to prevent in-process staining on pickled steel surfaces.
Manufacturer: PPG Industries
Ultrax LT8620
Cleaner; 1-Part; Liquid; Alkaline; Air dry
A liquid alkaline cleaner developed for use in low temperature cleaning applications on multi-metal substrates.
Manufacturer: PPG Industries
Ultraguard ATP50F/50FR
Conversion coating; 2-Part; Liquid; Iron phosphate; 2-Part cure
A low temperature iron phosphate for steel, galvanized steel and aluminum substrates prior to painting. It is designed for use after typical alkaline or neutral-based cleaners.
Manufacturer: PPG Industries
Spectracron 501 Series
Primer; 1-Part; Liquid; Low; Heat cure
Low VOC single component primer recommended for industrial use on properly prepared metal surfaces. It can provide good filling properties and strong corrosion resistance.
Manufacturer: PPG Industries
Chemical Resistance: Salt spray
Spectracron 701/702 Wash Primer
Wash primer; 2-Part; Liquid; Chromates; 2-Part Cure
A surface pretreatment intended for direct application to bare metal surfaces. It is specifically designed to improve the adhesion of topcoats with or without primer applications.
Manufacturer: PPG Industries
Chemical Resistance: Salt spray resistance: Fair
Aquacron MV398C Equipment Cleaner
Equipment cleaner; 1-Part; Liquid; 7.38 (lbs./gal.) Less water; None
Recommended to be used for the cleanup of tools, spray equipment, paint lines, etc. that have been used to spray any of the Aquacron waterbased primers or topcoats. It may also be used as a surface cleaner prior to painting non porous surfaces.
Manufacturer: PPG Industries
Spectracron 591 w/ QAP592
Primer; 2-Part; Liquid; Epoxy; 2-Part cure
Wet-on-wet epoxy primer is two-component, low VOC, corrosion resistant epoxy primers designed for properly prepared metal surfaces. Can be used over zinc rich primers, excellent flexibility.
Manufacturer: PPG Industries
Chemical Resistance: Salt spray
Spectracron 531 Series w/ QAP532
Primer; 2-Part; Liquid; Epoxy; 2-Part cure
Two component primer recommended for use on properly prepared metal substrates where high build and smooth finishes are required. Properties include excellent adhesion, toughness and corrosion resistance.
Manufacturer: PPG Industries
Chemical Resistance: Excellent; Salt spray
Manufacturer
Chemical Resistance
Application Type
1 Part or 2 Part
Description
PPG Industries
Excellent salt spray performance; Good
Primer
1-Part
Recommended for industrial use on metal surfaces. Suitable applications include metal fabrication, castings, machinery and heavy equipment. Fast drying, contains no heavy metals.
PPG Industries
Excellent chemical resistance ; Excellent early water spot resistance; Salt spray
Primer
1-Part
Water-reducible alkyd performance primer is fast drying, interior/exterior primer intended for industrial use on bare metal surfaces where corrosion resistance is needed. It can be utilized across a wide variety of end use markets from office furniture to heavy machinery.
PPG Industries
Cleaner
1-Part
A mildly acidic cleaner and rinse additive designed to remove light oxides from ferrous metal surfaces. Aids in the removal of hydrolyzed salts to prevent in-process staining on pickled steel surfaces.
PPG Industries
Cleaner
1-Part
A liquid alkaline cleaner developed for use in low temperature cleaning applications on multi-metal substrates.
PPG Industries
Conversion coating
2-Part
A low temperature iron phosphate for steel, galvanized steel and aluminum substrates prior to painting. It is designed for use after typical alkaline or neutral-based cleaners.
PPG Industries
Salt spray
Primer
1-Part
Low VOC single component primer recommended for industrial use on properly prepared metal surfaces. It can provide good filling properties and strong corrosion resistance.
PPG Industries
Salt spray resistance: Fair
Wash primer
2-Part
A surface pretreatment intended for direct application to bare metal surfaces. It is specifically designed to improve the adhesion of topcoats with or without primer applications.
PPG Industries
Equipment cleaner; Surface cleaner
1-Part
Recommended to be used for the cleanup of tools, spray equipment, paint lines, etc. that have been used to spray any of the Aquacron waterbased primers or topcoats. It may also be used as a surface cleaner prior to painting non porous surfaces.
PPG Industries
Salt spray
Primer
2-Part
Wet-on-wet epoxy primer is two-component, low VOC, corrosion resistant epoxy primers designed for properly prepared metal surfaces. Can be used over zinc rich primers, excellent flexibility.
PPG Industries
Excellent; Salt spray
Primer
2-Part
Two component primer recommended for use on properly prepared metal substrates where high build and smooth finishes are required. Properties include excellent adhesion, toughness and corrosion resistance.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
