- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
KE-1800T A/B
Bond; 2-Part; Liquid; Silicone; Heat cured;
A dual component, heat cure, high viscosity adhesive. It exhibits excellent, unprimed adhesion to metals, plastics, glass, and ceramics.;
Manufacturer:
Shinetsu
G-776
Grease; 1-Part; Grease; Solvent
diluted; None;
Thermal interface grease, offers high thermal conductivity & excellent electrical properties. It offers high resistance to pump-out, creep, and oil separation.;
Manufacturer:
Shinetsu
CLG-2500
Gap filler; 1-Part; Liquid; Low Molecular Weight Siloxane Stripped; Pre-cured;
• One-part • Gap filler • White • Excellent thermal conductivity • Excellent electrical properties • Exceptional resistance to pumping out.
;
Manufacturer:
Shinetsu
KE 3497 RTV Silicone
Coating; 1-Part; Liquid; Silicone; RTV;
One-component, Mil-A-46146 certified, flowable, Non-corrosive coating. RTV silicone is a high Strength silicone developed for coating/sealant applications in the aerospace and electronics industries.;
Manufacturer:
Shinetsu
KEG-2003H-50 A/B
Injection molding; 2-Part; Liquid; Silicone rubber; Press cure;
A fast cure liquid silicone rubber for injection molding. It is supplied as two components, low viscosity, excellent material flow properties.;
Manufacturer:
Shinetsu
KE-1950-10A/B
Injection
molding; 2-Part; Liquid; Silicone; Elevated Temperature;
A liquid injection molding silicone. It is supplied as two components, low viscosity, rapid cure time at elevated temperature. Long pot life at room temperature.;
Manufacturer:
Shinetsu
X-30-4327U w/ C-25 A/B
Molded; 2-Part; Liquid; Silicone
rubber base; 2-Part Cure;
A high strength, easy processing silicone rubber base. It is used in a variety of applications, can be molded,
extruded, or calendared.;
Manufacturer:
Shinetsu
KE-4806
Bond; 1-Part; Liquid; Low Molecular Weight Siloxane Stripped; Room-temperature cure;
• Single component • High viscosity • Room-temperature cure • Low odor and non-corrosive • White • Adhesive/Sealant;
Manufacturer:
Shinetsu
PCS-CR-10
Good adhesion; 1-Part; Sheet; Phase Change Material; Pressure-Sensitive;
A thermally conductive phase-change material designed to conform to the substrates that it is applied to. It exhibits excellent thermal conductivity, low thermal resistance, and good adhesion to metal and graphite substrates.;
Manufacturer:
Shinetsu
SMP-7004
Bond; 1-Part; Liquid; Polyimide silicone; UV Cure;
• One component • Polyimide silicone • UV Cure • Compatible with UV-LEDs • Yellow Tranparent;
Manufacturer:
Shinetsu
KE-1800T A/B
Bond; 2-Part; Liquid; Silicone; Heat cured
A dual component, heat cure, high viscosity adhesive. It exhibits excellent, unprimed adhesion to metals, plastics, glass, and ceramics.
Manufacturer: Shinetsu
G-776
Grease; 1-Part; Grease; Solvent
diluted; None
Thermal interface grease, offers high thermal conductivity & excellent electrical properties. It offers high resistance to pump-out, creep, and oil separation.
Manufacturer: Shinetsu
CLG-2500
Gap filler; 1-Part; Liquid; Low Molecular Weight Siloxane Stripped; Pre-cured
• One-part • Gap filler • White • Excellent thermal conductivity • Excellent electrical properties • Exceptional resistance to pumping out.
Manufacturer: Shinetsu
KE 3497 RTV Silicone
Coating; 1-Part; Liquid; Silicone; RTV
One-component, Mil-A-46146 certified, flowable, Non-corrosive coating. RTV silicone is a high Strength silicone developed for coating/sealant applications in the aerospace and electronics industries.
Manufacturer: Shinetsu
KEG-2003H-50 A/B
Injection molding; 2-Part; Liquid; Silicone rubber; Press cure
A fast cure liquid silicone rubber for injection molding. It is supplied as two components, low viscosity, excellent material flow properties.
Manufacturer: Shinetsu
KE-1950-10A/B
Injection
molding; 2-Part; Liquid; Silicone; Elevated Temperature
A liquid injection molding silicone. It is supplied as two components, low viscosity, rapid cure time at elevated temperature. Long pot life at room temperature.
Manufacturer: Shinetsu
X-30-4327U w/ C-25 A/B
Molded; 2-Part; Liquid; Silicone
rubber base; 2-Part Cure
A high strength, easy processing silicone rubber base. It is used in a variety of applications, can be molded,
extruded, or calendared.
Manufacturer: Shinetsu
KE-4806
Bond; 1-Part; Liquid; Low Molecular Weight Siloxane Stripped; Room-temperature cure
• Single component • High viscosity • Room-temperature cure • Low odor and non-corrosive • White • Adhesive/Sealant
Manufacturer: Shinetsu
PCS-CR-10
Good adhesion; 1-Part; Sheet; Phase Change Material; Pressure-Sensitive
A thermally conductive phase-change material designed to conform to the substrates that it is applied to. It exhibits excellent thermal conductivity, low thermal resistance, and good adhesion to metal and graphite substrates.
Manufacturer: Shinetsu
Manufacturer
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Shinetsu
Bond; Form-in-place gasketing; Sealing
2-Part
A dual component, heat cure, high viscosity adhesive. It exhibits excellent, unprimed adhesion to metals, plastics, glass, and ceramics.
Shinetsu
Grease; Thermal interface grease
1-Part
Thermal interface grease, offers high thermal conductivity & excellent electrical properties. It offers high resistance to pump-out, creep, and oil separation.
Shinetsu
Gap filler; Thermal interface material
1-Part
• One-part • Gap filler • White • Excellent thermal conductivity • Excellent electrical properties • Exceptional resistance to pumping out.
Shinetsu
Coating
1-Part
One-component, Mil-A-46146 certified, flowable, Non-corrosive coating. RTV silicone is a high Strength silicone developed for coating/sealant applications in the aerospace and electronics industries.
Shinetsu
Injection molding
2-Part
A fast cure liquid silicone rubber for injection molding. It is supplied as two components, low viscosity, excellent material flow properties.
Shinetsu
Injection
molding
2-Part
A liquid injection molding silicone. It is supplied as two components, low viscosity, rapid cure time at elevated temperature. Long pot life at room temperature.
Shinetsu
Molded
2-Part
A high strength, easy processing silicone rubber base. It is used in a variety of applications, can be molded,
extruded, or calendared.
Shinetsu
Bond; Filler; Form-in-place gasketing; Sealing
1-Part
• Single component • High viscosity • Room-temperature cure • Low odor and non-corrosive • White • Adhesive/Sealant
Shinetsu
Good adhesion
1-Part
A thermally conductive phase-change material designed to conform to the substrates that it is applied to. It exhibits excellent thermal conductivity, low thermal resistance, and good adhesion to metal and graphite substrates.
Shinetsu
Bond; Coating
1-Part
• One component • Polyimide silicone • UV Cure • Compatible with UV-LEDs • Yellow Tranparent
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
