Advanced Search
Gluespec's goal is to help you build better products by curating a comprehensive and quality-tested database of adhesive materials. Your research goals demand that Gluespec does not limit the number of manufacturers or materials in its database. Data is quality-checked and updated as needed when new data sheets or key specs are released.
Welcome to the Gluespec Grids. Let’s find you the material that you need!
1
Enter your technical requirements into the "Guide Me" tool or the Advanced Search filters below2
Compare materials side-by-side or get a detailed view of their data sheets3
Order samples or request a quote for the materials you need. *Note* our experts are available throughout the whole process
Use the filters or the Guide Me tool above the grid to narrow down your results
Once you have 4 or fewer results, use compare view to decide which material to sample
Request a quote or sample to test in your project
3748
Bond; One Part; Sticks; Hot melt; Hot melt;
Good thermal shock resistance • Non-corrosive to copper for many electronic applications • Bonds polyolefins;
Manufacturer:
3M
Color:
Off White
Viscosity (cPs):
4,000; 5,000; 6,500; 12,500
Tensile Strength (psi):
2.6 (Mpa)
Thermogrip 2124
Bond; One Part; Stick; Hot melt; Hot melt;
Flexible hot melt adhesive, long set time, designed for high performance bonding of difficult substrates or substrate combinations.;
Manufacturer:
Bostik
Viscosity (cPs):
7,600; 15,000
Tensile Strength (psi):
450 psi
3762
Bond; One Part; Stick; EVA; Hot melt;
Excellent “hot tack”, fast-setting • Economical, general purpose for corrugated packaging, beadboard, recouperage, repacking area • Can bond chipboard and wood;
Manufacturer:
3M
Color:
Tan
Viscosity (cPs):
1,870
Tensile Strength (psi):
3.1 (MPa); 450 psi
Thermogrip 2107
Bond; One Part; Stick; Hot melt; Hot melt;
Tough, medium setting, versatile hot melt adhesive, good "idling" performance in most glue guns, low odor.;
Manufacturer:
Bostik
Color:
Straw
Viscosity (cPs):
4,500; 7,750
Tensile Strength (psi):
350 psi
Thermogrip 2109
Bond; One Part; Stick; Hot melt; Hot melt;
Medium-setting hot melt adhesive, economical with low viscosity and quick grab ability very good "gunability" in stick form.;
Manufacturer:
Bostik
Color:
Tan
Viscosity (cPs):
Low; 1,700; 2,700; 7,375; 19,800
Tensile Strength (psi):
520 psi
3738
Bond; One Part; Pellets; Hot melt; Hot melt;
High delivery rate and long bonding range • General purpose for foundry sand cores, wood bonding, corrugated, selected plastics and chipboard;
Manufacturer:
3M
Color:
Tan
Viscosity (cPs):
2,875
Tensile Strength (psi):
360 psi
HM-2500
Seal; One Part; Bulk; Silicone-based Hotmelt; RTV;
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, instant adhesion with a high green strength, cures to a tough rubbery solid.;
Manufacturer:
Dow
Color:
Ultra clear
Viscosity (cPs):
High; NonFlow; 210,000
Tensile Strength (psi):
350 psi
HM1580
Bond; One Part; Bulk; Hot melt; Hot melt;
A versatile, high performance polyamide adhesive, designed for demanding product assembly operations. It combines medium open-time, excellent high and low temperature properties, resistance to oil, many chemicals and solvents, and adhesion to a broad spectrum of difficult-to-bond substrates.;
Manufacturer:
HB Fuller
Viscosity (cPs):
7,000; 8,200; 11,750; 20,500
Tensile Strength (psi):
838 psi
3764
Bond; One Part; Pellets; EVA; Hot melt;
Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene • Flexible at low temperatures;
Manufacturer:
3M
Color:
Clear
Viscosity (cPs):
6,000
Tensile Strength (psi):
650 psi; 652 psi
HM-324
Adhesive; One Part; Pellets; EVA; Hot melt;
This EVA hot melt was designed as a permanent adhesive for bond of flexible polyolefin films. Good adhesion to paper, metal and some plastics.;
Manufacturer:
Elemelt
Color:
Clear to Very Light Yellow
Viscosity (cPs):
2,600
3748
Bond; One Part; Sticks; Hot melt; Hot melt
Good thermal shock resistance • Non-corrosive to copper for many electronic applications • Bonds polyolefins
Manufacturer: 3M
Color: Off White
Viscosity (cPs): 4,000; 5,000; 6,500; 12,500
Tensile Strength (psi): 2.6 (Mpa)
Thermogrip 2124
Bond; One Part; Stick; Hot melt; Hot melt
Flexible hot melt adhesive, long set time, designed for high performance bonding of difficult substrates or substrate combinations.
Manufacturer: Bostik
Viscosity (cPs): 7,600; 15,000
Tensile Strength (psi): 450 psi
3762
Bond; One Part; Stick; EVA; Hot melt
Excellent “hot tack”, fast-setting • Economical, general purpose for corrugated packaging, beadboard, recouperage, repacking area • Can bond chipboard and wood
Manufacturer: 3M
Color: Tan
Viscosity (cPs): 1,870
Tensile Strength (psi): 3.1 (MPa); 450 psi
Thermogrip 2107
Bond; One Part; Stick; Hot melt; Hot melt
Tough, medium setting, versatile hot melt adhesive, good "idling" performance in most glue guns, low odor.
Manufacturer: Bostik
Color: Straw
Viscosity (cPs): 4,500; 7,750
Tensile Strength (psi): 350 psi
Package Sizes
7/16 x 10 Stick
Thermogrip 2109
Bond; One Part; Stick; Hot melt; Hot melt
Medium-setting hot melt adhesive, economical with low viscosity and quick grab ability very good "gunability" in stick form.
Manufacturer: Bostik
Color: Tan
Viscosity (cPs): Low; 1,700; 2,700; 7,375; 19,800
Tensile Strength (psi): 520 psi
3738
Bond; One Part; Pellets; Hot melt; Hot melt
High delivery rate and long bonding range • General purpose for foundry sand cores, wood bonding, corrugated, selected plastics and chipboard
Manufacturer: 3M
Color: Tan
Viscosity (cPs): 2,875
Tensile Strength (psi): 360 psi
HM-2500
Seal; One Part; Bulk; Silicone-based Hotmelt; RTV
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, instant adhesion with a high green strength, cures to a tough rubbery solid.
Manufacturer: Dow
Color: Ultra clear
Viscosity (cPs): High; NonFlow; 210,000
Tensile Strength (psi): 350 psi
Package Sizes
Clear 22 kg
HM1580
Bond; One Part; Bulk; Hot melt; Hot melt
A versatile, high performance polyamide adhesive, designed for demanding product assembly operations. It combines medium open-time, excellent high and low temperature properties, resistance to oil, many chemicals and solvents, and adhesion to a broad spectrum of difficult-to-bond substrates.
Manufacturer: HB Fuller
Viscosity (cPs): 7,000; 8,200; 11,750; 20,500
Tensile Strength (psi): 838 psi
Package Sizes
40 lb Pellets
3764
Bond; One Part; Pellets; EVA; Hot melt
Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene • Flexible at low temperatures
Manufacturer: 3M
Color: Clear
Viscosity (cPs): 6,000
Tensile Strength (psi): 650 psi; 652 psi
HM-324
Adhesive; One Part; Pellets; EVA; Hot melt
This EVA hot melt was designed as a permanent adhesive for bond of flexible polyolefin films. Good adhesion to paper, metal and some plastics.
Manufacturer: Elemelt
Color: Clear to Very Light Yellow
Viscosity (cPs): 2,600
Package Sizes
50 lb Carton
Chemistry
Color
Viscosity (cPs)
Tensile Strength (psi)
Description
Hot melt
Off White
4,000; 5,000; 6,500; 12,500
2.6 (Mpa)
Good thermal shock resistance • Non-corrosive to copper for many electronic applications • Bonds polyolefins
Hot melt
7,600; 15,000
450 psi
Flexible hot melt adhesive, long set time, designed for high performance bonding of difficult substrates or substrate combinations.
EVA; Jet melt
Tan
1,870
3.1 (MPa); 450 psi
Excellent “hot tack”, fast-setting • Economical, general purpose for corrugated packaging, beadboard, recouperage, repacking area • Can bond chipboard and wood
Hot melt
Straw
4,500; 7,750
350 psi
Tough, medium setting, versatile hot melt adhesive, good "idling" performance in most glue guns, low odor.
Hot melt
Tan
Low; 1,700; 2,700; 7,375; 19,800
520 psi
Medium-setting hot melt adhesive, economical with low viscosity and quick grab ability very good "gunability" in stick form.
Hot melt; Jet melt
Tan
2,875
360 psi
High delivery rate and long bonding range • General purpose for foundry sand cores, wood bonding, corrugated, selected plastics and chipboard
Silicone-based Hotmelt; Silicone-based Hotmelt
Ultra clear
High; NonFlow; 210,000
350 psi
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, instant adhesion with a high green strength, cures to a tough rubbery solid.
Hot melt; Polyamide
7,000; 8,200; 11,750; 20,500
838 psi
A versatile, high performance polyamide adhesive, designed for demanding product assembly operations. It combines medium open-time, excellent high and low temperature properties, resistance to oil, many chemicals and solvents, and adhesion to a broad spectrum of difficult-to-bond substrates.
EVA; Jet melt
Clear
6,000
650 psi; 652 psi
Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene • Flexible at low temperatures
EVA
Clear to Very Light Yellow
2,600
This EVA hot melt was designed as a permanent adhesive for bond of flexible polyolefin films. Good adhesion to paper, metal and some plastics.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
