- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
1923 results
Reset
1B73
Conformal Coat; 1-Part; Liquid; Solvent-based; Air dry;
An acrylic coating characterized by a higher tack resistance at elevated temperatures not normally associated with thermoplastic materials. Has excellent electrical properties and flexibility. This coating is also available in AEROSOL CANS.;
Manufacturer:
HumiSeal
Color:
Transparent
High Temperature Resistance (°C):
Passes thermal shock; 125
Low Temperature Resistance (°C):
-65
OS-30
Liquid Cleaner; 1-Part; Liquid; Volatile methylsiloxanes; Solvent;
Cleaning agent and carrier; non-allergenic; low toxicity; low surface tension; evaporates completely at room temperature; compatible with most plastics and surface treatments.;
Manufacturer:
Dow
Color:
Clear; Colorless
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.;
Manufacturer:
Parker Lord
Color:
Clear; Cloudy; Hazy
Dowsil 1-2577 Conformal Coating
Conformal Coating; 1-Part; Liquid; Solvent-borne; Room temperature cure;
One-part, translucent medium viscosity conformal coating with firm, abrasion resistant surface after cure. Solvent-borne resin coating. Room temperature cure.;
Manufacturer:
Dow
Color:
Clear; Transparent
High Temperature Resistance (°C):
200
Low Temperature Resistance (°C):
-55; -45
1B31LOC
Conformal Coat; 1-Part; Liquid; Solvent-based; Solvent;
A very low VOC non ODC solvent based conformal coating that complies with all current air quality regulations. 1B31LOC is a fast air drying; single component, acrylic coating providing excellent moisture and environmental protection for printed circuit assembles. The final film demonstrates excellent flexibility, is easily repairable and retains all of the film properties of the standard 1B31.;
Manufacturer:
HumiSeal
Color:
Transparent
High Temperature Resistance (°C):
125
Low Temperature Resistance (°C):
-65
Thinner 64
Thinner; 1-Part; Liquid; Solvent-Based; Solvent;
Blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.;
92-023 Primer
Prime; 2-Part; Liquid; Heptane Solvent; Solvent;
Specially formulated for use with addition-cure silicones to mitigate surface cure poisoning. This clear primer is diluted in heptane solvent and enhances the adhesion of many addition-cure silicones to a wide variety of surfaces.;
Loctite SF 7649
Primer; 1-Part; Liquid; Acetone; Solvent;
A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.;
Manufacturer:
Henkel
Dynasolve 185
Remove; 1-Part; Liquid; Solvent; Solvent;
Solvent for deflashing, depotting, deinking, and other epoxy removal. It will disintegrate many epoxy-molded devices including UV-cured and amine-cured epoxies.;
Manufacturer:
EMD Group (Versum, Dynaloy)
Color:
Clear
Dynasolve CU-5
Remove; 1-Part; Liquid; Solvent-Based; Solvent;
Recommended for cleaning cured urethanes and crystallized isocyanates. can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation. CU-6 is a non-gelling, higher flash point version of CU-5.;
Manufacturer:
EMD Group (Versum, Dynaloy)
Color:
Clear
High Temperature Resistance (°C):
54 to 66
1B73
Conformal Coat; 1-Part; Liquid; Solvent-based; Air dry
An acrylic coating characterized by a higher tack resistance at elevated temperatures not normally associated with thermoplastic materials. Has excellent electrical properties and flexibility. This coating is also available in AEROSOL CANS.
Manufacturer: HumiSeal
Color: Transparent
High Temperature Resistance (°C): Passes thermal shock; 125
Low Temperature Resistance (°C): -65
OS-30
Liquid Cleaner; 1-Part; Liquid; Volatile methylsiloxanes; Solvent
Cleaning agent and carrier; non-allergenic; low toxicity; low surface tension; evaporates completely at room temperature; compatible with most plastics and surface treatments.
Manufacturer: Dow
Color: Clear; Colorless
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Manufacturer: Parker Lord
Color: Clear; Cloudy; Hazy
Dowsil 1-2577 Conformal Coating
Conformal Coating; 1-Part; Liquid; Solvent-borne; Room temperature cure
One-part, translucent medium viscosity conformal coating with firm, abrasion resistant surface after cure. Solvent-borne resin coating. Room temperature cure.
Manufacturer: Dow
Color: Clear; Transparent
High Temperature Resistance (°C): 200
Low Temperature Resistance (°C): -55; -45
1B31LOC
Conformal Coat; 1-Part; Liquid; Solvent-based; Solvent
A very low VOC non ODC solvent based conformal coating that complies with all current air quality regulations. 1B31LOC is a fast air drying; single component, acrylic coating providing excellent moisture and environmental protection for printed circuit assembles. The final film demonstrates excellent flexibility, is easily repairable and retains all of the film properties of the standard 1B31.
Manufacturer: HumiSeal
Color: Transparent
High Temperature Resistance (°C): 125
Low Temperature Resistance (°C): -65
Thinner 64
Thinner; 1-Part; Liquid; Solvent-Based; Solvent
Blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
92-023 Primer
Prime; 2-Part; Liquid; Heptane Solvent; Solvent
Specially formulated for use with addition-cure silicones to mitigate surface cure poisoning. This clear primer is diluted in heptane solvent and enhances the adhesion of many addition-cure silicones to a wide variety of surfaces.
Loctite SF 7649
Primer; 1-Part; Liquid; Acetone; Solvent
A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.
Manufacturer: Henkel
Dynasolve 185
Remove; 1-Part; Liquid; Solvent; Solvent
Solvent for deflashing, depotting, deinking, and other epoxy removal. It will disintegrate many epoxy-molded devices including UV-cured and amine-cured epoxies.
Dynasolve CU-5
Remove; 1-Part; Liquid; Solvent-Based; Solvent
Recommended for cleaning cured urethanes and crystallized isocyanates. can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation. CU-6 is a non-gelling, higher flash point version of CU-5.
Manufacturer: EMD Group (Versum, Dynaloy)
Color: Clear
High Temperature Resistance (°C): 54 to 66
Chemistry
Color
High Temperature Resistance
(°C)
Low Temperature Resistance
(°C)
Description
Solvent-based; 661 grams/litre; Acrylic
Transparent
Passes thermal shock; 125
-65
An acrylic coating characterized by a higher tack resistance at elevated temperatures not normally associated with thermoplastic materials. Has excellent electrical properties and flexibility. This coating is also available in AEROSOL CANS.
Volatile methylsiloxanes
Clear; Colorless
Cleaning agent and carrier; non-allergenic; low toxicity; low surface tension; evaporates completely at room temperature; compatible with most plastics and surface treatments.
Solvent-Based; Ethyl-Acetate
Clear; Cloudy; Hazy
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Solvent-borne; Silicone resin
Clear; Transparent
200
-55; -45
One-part, translucent medium viscosity conformal coating with firm, abrasion resistant surface after cure. Solvent-borne resin coating. Room temperature cure.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
453 g Cartridge 453 g to Spec 453 g Glass Bottle 3.6 kg Pail 3.6 kg to Spec 18.1 kg Pail 18.1 kg to Spec 199.5 kg Drum
Solvent-based; Acrylic
Transparent
125
-65
A very low VOC non ODC solvent based conformal coating that complies with all current air quality regulations. 1B31LOC is a fast air drying; single component, acrylic coating providing excellent moisture and environmental protection for printed circuit assembles. The final film demonstrates excellent flexibility, is easily repairable and retains all of the film properties of the standard 1B31.
Blends of solvents; Solvent-Based
Clear
Blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
Heptane Solvent
Clear
Specially formulated for use with addition-cure silicones to mitigate surface cure poisoning. This clear primer is diluted in heptane solvent and enhances the adhesion of many addition-cure silicones to a wide variety of surfaces.
Acetone; Copper salt and Aliphatic amine
A solvent-based primer that features very long on-part life. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature.
Solvent; Biodegradable; Blend of ingredients; Non-hazardous
Clear
Solvent for deflashing, depotting, deinking, and other epoxy removal. It will disintegrate many epoxy-molded devices including UV-cured and amine-cured epoxies.
Solvent-Based; Non-carcinogenic; Non-chlorinated; Nonflammable; Nonozone depleting.
Clear
54 to 66
Recommended for cleaning cured urethanes and crystallized isocyanates. can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation. CU-6 is a non-gelling, higher flash point version of CU-5.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
