- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
Loctite Stycast UV 7993
Conformal Coating; 1-Part; Liquid; Solvent-free; UV curable;
A conformal coating designed to provide rugged protection from moisture and harsh chemicals.;
Manufacturer:
Henkel
Industry:
Reader; Smart Health Patch; Guidance Systems; Industry standard solder masks; Printed circuit board; Printed wire board; Radar
Chemical Resistance:
Excellent; Rugged protection from harsh chemicals
888 Silicone Release Agent and Lubricant
Lubricate; 1-Part; Liquid; Silicone; Solvent;
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.;
Manufacturer:
Camie Campbell
Industry:
Needles; Cushions; Foam; Furniture; Garments; Saws; Sewing tables; Slitters; Thread guides; Upholstery
Adhesive Transfer Tape 950
Bond; Tape; Acrylic; Pressure Sensitive;
Excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam.;
Manufacturer:
3M
Industry:
Medical equipment; Aerospace; Appliance; Automotive; Bonding metal nameplates; Bonding rating plates; Electronic markets; General purpose holding and mounting applications; Graphic overlays; Industrial equipment; Long term bonding of graphic nameplates; Splicing of fabrics; Splicing of film; Splicing of foils
Chemical Resistance:
Alkalis; Chemical Resistance; Medium Relative Solvent Resistance; Mild acids; Oils; Water Resistance
Axis UV-935
Bond; 1-Part; Liquid; Acrylated urethane; UV or Visible Light;
A low viscosity adhesive, which bonds heavily plasticized PVC. It bonds thermoplastics, such as polycarbonate and ABS. Appropriate for the assembly of disposable medical materials.;
Manufacturer:
Resin Designs
Industry:
Assembly of disposable medical materials; Assembly of disposable medical materials
Loctite 4307
Bond; 1-Part; Liquid; Cyanoacrylate; Ultraviolet (UV) / Visible light;
A one part, Designed for bonding applications that require very rapid fixturing. Suitable for use in the assembly
of disposable medical devices.;
Manufacturer:
Henkel
Industry:
Endoscopes; Needle Bonding; Suitable for use in the assembly
of disposable medical devices; Designed for bonding applications that
require very rapid fixturing
Chemical Resistance:
95% RH; Heptane; Isopropanol; Solvent Resistance; Water
Loctite 4061
Bond; 1-Part; Liquid; Cyanoacrylate; Humidity;
Low viscosity, designed for bonding of plastics and elastomeric materials where very fast fixturing is required.;
Manufacturer:
Henkel
Industry:
Endoscopes; Imaging Equipment; Medical devices
Chemical Resistance:
Chemical resistance; Ethanol; Freon TA; Gasoline; Heat/Humidity 95% RH; Heat/Humidity 95% RH on Polycarbonate; Isopropanol; Motor Oil; Solvent; Water Glycol 50/50
Silicone Lubricant
Lubricate; 1-Part; Aerosol; Silicone; Air dry;
Lubricates cutting tools and tables cutting • Helps prevent buildup of glues, wax, inks, paints • Won’t stain or become gummy • FDA listed ingredients • Temperature resistance 350°F;
Manufacturer:
3M
Industry:
Needles; Commercial & Specialty Vehicles; Cutting tools; Machines; Sewing; Tables; Tools
Loctite 4011
Bond; 1-Part; Liquid; Cyanoacrylate; Humidity;
A low viscosity, instant adhesive ideally suited for dry environments, as well as for bonding acidic and porous surfaces.;
Manufacturer:
Henkel
Industry:
Endoscopes; Imaging Equipment; Medical devices
Chemical Resistance:
Alcohol, Isopropyl; Chemical resistance; Ethanol; Freon TA; Gasoline; Heat/Humidity 95% RH; Heat/Humidity 95% RH on Polycarbonate; Motor Oil; Solvent
Tacky Tape SM5127
Sealant; 1-Part; Tape; Non-Hazardous; Autoclave cure;
A tape sealant that is an unsurpassed where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Non-Hazardous and thermally stable, tenacious adhesion to nylon films and tool surfaces.;
Manufacturer:
Schnee-Morehead (ITW)
Industry:
Autoclave cycles; Composite Tool surfaces; Fabrication of parts; Most bagging films; Nylon films
Loctite 4014
Bonding; 1-Part; Liquid; Cyanoacrylate; Humidity Cure;
Designed to provide fast room temperature fixturing and is also suitable for applications where heat resistance is required.;
Manufacturer:
Henkel
Industry:
Disposable medical devices; Endoscopes; Imaging Equipment; Applications where heat resistance is required
Chemical Resistance:
Chemical resistance; Solvent resistance
Loctite Stycast UV 7993
Conformal Coating; 1-Part; Liquid; Solvent-free; UV curable
A conformal coating designed to provide rugged protection from moisture and harsh chemicals.
Manufacturer: Henkel
Industry: Reader; Smart Health Patch; Guidance Systems; Industry standard solder masks; Printed circuit board; Printed wire board; Radar
Chemical Resistance: Excellent; Rugged protection from harsh chemicals
888 Silicone Release Agent and Lubricant
Lubricate; 1-Part; Liquid; Silicone; Solvent
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Manufacturer: Camie Campbell
Industry: Needles; Cushions; Foam; Furniture; Garments; Saws; Sewing tables; Slitters; Thread guides; Upholstery
Package Sizes
Spray
Adhesive Transfer Tape 950
Bond; Tape; Acrylic; Pressure Sensitive
Excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam.
Manufacturer: 3M
Industry: Medical equipment; Aerospace; Appliance; Automotive; Bonding metal nameplates; Bonding rating plates; Electronic markets; General purpose holding and mounting applications; Graphic overlays; Industrial equipment; Long term bonding of graphic nameplates; Splicing of fabrics; Splicing of film; Splicing of foils
Chemical Resistance: Alkalis; Chemical Resistance; Medium Relative Solvent Resistance; Mild acids; Oils; Water Resistance
Axis UV-935
Bond; 1-Part; Liquid; Acrylated urethane; UV or Visible Light
A low viscosity adhesive, which bonds heavily plasticized PVC. It bonds thermoplastics, such as polycarbonate and ABS. Appropriate for the assembly of disposable medical materials.
Manufacturer: Resin Designs
Industry: Assembly of disposable medical materials; Assembly of disposable medical materials
Loctite 4307
Bond; 1-Part; Liquid; Cyanoacrylate; Ultraviolet (UV) / Visible light
A one part, Designed for bonding applications that require very rapid fixturing. Suitable for use in the assembly
of disposable medical devices.
Manufacturer: Henkel
Industry: Endoscopes; Needle Bonding; Suitable for use in the assembly
of disposable medical devices; Designed for bonding applications that
require very rapid fixturing
Chemical Resistance: 95% RH; Heptane; Isopropanol; Solvent Resistance; Water
Loctite 4061
Bond; 1-Part; Liquid; Cyanoacrylate; Humidity
Low viscosity, designed for bonding of plastics and elastomeric materials where very fast fixturing is required.
Manufacturer: Henkel
Industry: Endoscopes; Imaging Equipment; Medical devices
Chemical Resistance: Chemical resistance; Ethanol; Freon TA; Gasoline; Heat/Humidity 95% RH; Heat/Humidity 95% RH on Polycarbonate; Isopropanol; Motor Oil; Solvent; Water Glycol 50/50
Silicone Lubricant
Lubricate; 1-Part; Aerosol; Silicone; Air dry
Lubricates cutting tools and tables cutting • Helps prevent buildup of glues, wax, inks, paints • Won’t stain or become gummy • FDA listed ingredients • Temperature resistance 350°F
Manufacturer: 3M
Industry: Needles; Commercial & Specialty Vehicles; Cutting tools; Machines; Sewing; Tables; Tools
Loctite 4011
Bond; 1-Part; Liquid; Cyanoacrylate; Humidity
A low viscosity, instant adhesive ideally suited for dry environments, as well as for bonding acidic and porous surfaces.
Manufacturer: Henkel
Industry: Endoscopes; Imaging Equipment; Medical devices
Chemical Resistance: Alcohol, Isopropyl; Chemical resistance; Ethanol; Freon TA; Gasoline; Heat/Humidity 95% RH; Heat/Humidity 95% RH on Polycarbonate; Motor Oil; Solvent
Tacky Tape SM5127
Sealant; 1-Part; Tape; Non-Hazardous; Autoclave cure
A tape sealant that is an unsurpassed where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Non-Hazardous and thermally stable, tenacious adhesion to nylon films and tool surfaces.
Manufacturer: Schnee-Morehead (ITW)
Industry: Autoclave cycles; Composite Tool surfaces; Fabrication of parts; Most bagging films; Nylon films
Loctite 4014
Bonding; 1-Part; Liquid; Cyanoacrylate; Humidity Cure
Designed to provide fast room temperature fixturing and is also suitable for applications where heat resistance is required.
Manufacturer: Henkel
Industry: Disposable medical devices; Endoscopes; Imaging Equipment; Applications where heat resistance is required
Chemical Resistance: Chemical resistance; Solvent resistance
Industry
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Reader; Smart Health Patch; Guidance Systems; Industry standard solder masks; Printed circuit board; Printed wire board; Radar
Excellent; Rugged protection from harsh chemicals
Conformal Coating
1-Part
A conformal coating designed to provide rugged protection from moisture and harsh chemicals.
Needles; Cushions; Foam; Furniture; Garments; Saws; Sewing tables; Slitters; Thread guides; Upholstery
Lubricate; Release Agent
1-Part
A 3% silicone content spray used in the upholstery, foam and furniture industry as a release agent. Once applied, it is odorless and non-staining. Does not contain chlorofluorocarbons or ozone depleting chemicals.
Medical equipment; Aerospace; Appliance; Automotive; Bonding metal nameplates; Bonding rating plates; Electronic markets; General purpose holding and mounting applications; Graphic overlays; Industrial equipment; Long term bonding of graphic nameplates; Splicing of fabrics; Splicing of film; Splicing of foils
Alkalis; Chemical Resistance; Medium Relative Solvent Resistance; Mild acids; Oils; Water Resistance
Bond
Excellent adhesion to a wide variety of surfaces, including low surface energy plastics and foam.
Assembly of disposable medical materials; Assembly of disposable medical materials
Bond; Instant Adhesives
1-Part
A low viscosity adhesive, which bonds heavily plasticized PVC. It bonds thermoplastics, such as polycarbonate and ABS. Appropriate for the assembly of disposable medical materials.
Endoscopes; Needle Bonding; Suitable for use in the assembly
of disposable medical devices; Designed for bonding applications that
require very rapid fixturing
95% RH; Heptane; Isopropanol; Solvent Resistance; Water
Bond
1-Part
A one part, Designed for bonding applications that require very rapid fixturing. Suitable for use in the assembly
of disposable medical devices.
Endoscopes; Imaging Equipment; Medical devices
Chemical resistance; Ethanol; Freon TA; Gasoline; Heat/Humidity 95% RH; Heat/Humidity 95% RH on Polycarbonate; Isopropanol; Motor Oil; Solvent; Water Glycol 50/50
Bond; Instant Adhesives
1-Part
Low viscosity, designed for bonding of plastics and elastomeric materials where very fast fixturing is required.
Needles; Commercial & Specialty Vehicles; Cutting tools; Machines; Sewing; Tables; Tools
Lubricate; Maintain; Repair
1-Part
Lubricates cutting tools and tables cutting • Helps prevent buildup of glues, wax, inks, paints • Won’t stain or become gummy • FDA listed ingredients • Temperature resistance 350°F
Endoscopes; Imaging Equipment; Medical devices
Alcohol, Isopropyl; Chemical resistance; Ethanol; Freon TA; Gasoline; Heat/Humidity 95% RH; Heat/Humidity 95% RH on Polycarbonate; Motor Oil; Solvent
Bond; Instant Adhesives
1-Part
A low viscosity, instant adhesive ideally suited for dry environments, as well as for bonding acidic and porous surfaces.
Autoclave cycles; Composite Tool surfaces; Fabrication of parts; Most bagging films; Nylon films
Bond; Sealant
1-Part
A tape sealant that is an unsurpassed where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Non-Hazardous and thermally stable, tenacious adhesion to nylon films and tool surfaces.
Disposable medical devices; Endoscopes; Imaging Equipment; Applications where heat resistance is required
Chemical resistance; Solvent resistance
Bonding
1-Part
Designed to provide fast room temperature fixturing and is also suitable for applications where heat resistance is required.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
