Copper Spray
Coating; 1-Part; Liquid; Acrylate resin; Air Dry;
High-quality, weather-resistant metal spray with high adhesive strength and a high copper content for protective and decorative coating with an appealing non-ferrous metal character for indoor and outdoor use.;
Loctite Ablestik XCE 3104XL
Coat; 1-Part; Liquid; Epoxy; Heat cure;
● One component ● Thermosetting ● Controlled particle size ● Electrically conductive ●Pb-free alternative to solder ● Long stencil work life at high print speed ● Low temperature cure ● No post cure required ● Low CTE ● Intrinsically clean ●
;
2290
Coating; 1-Part; Liquid; Epoxy; Solvent;
21% solids liquid epoxy • B-stageable • Laminating steel cores for motor stators and rotors • Thin metal stack laminations;
ECS0601
Coating; 1-Part; Liquid; Silicone; Condensation Cure;
A one-component, low viscosity, low volatile silicone coating, which cures at room temperature to an elastomeric rubber upon exposure to humidity in the air. Excellent adhesion to a wide range of substrates.;
Loctite EDAG PD 056 E&C
Conductive coating; 1-Part; Liquid; Consists of silver particles in a thermoplastic resin; Hot air drying;
A PVC vinyl, silver liquid appearance, Coating consists of silver particles in a thermoplastic resin that rapidly air dries to form a flexible conductive coating.;
Darex IW 4222-06
Lacquer; 1-Part; Liquid; BPANI; Solvent;
Internal white lacquer sterilization process resistance recommended for the entire internal lacquering of 3-piece food cans-ends and cans body for aggressive food packs.;
Loctite SF 7803
Coating; 1-Part; Liquid; Parrafin wax; Solvent evaporation;
A tack-free coating on metals with long term corrosion protection and has good U.V. resistance. This product is especially suited for iron, steel, sheet steel, pipes, moulds, machines and installations that have to be stored outdoors.;
Bonderite S-MA 5000 Aero
Protective coating; 2-Part; Liquid; Polyurethane; Air dry;
A two-part, 100% solid 2-K maskant polyurethane based material formulated to provide an air curing, hand peelable coating. When applied, this material is designed to provide a strong protection to the metal surfaces during chemical processing.;
TSE3221S
Coating; 1-Part; Liquid; Silicone; Heat;
A translucent one-component, heat curable silicone adhesive designed for sealing and coating, Excellent high and low temperature resistance.;
769-3
Coating; 1-Part; Gel; Epoxy; UV Cure;
A 100% solids, silicone free, very low extractable ions, epoxy coating may be used, as an interface in any high reliability electronics or microelectronics application where resiliency and excellent temperature cycling is required.;