- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
2195 results
Reset
3145 RTV Clear Adhesive/Sealant
Seal; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV;
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.;
Manufacturer:
Dow
Substrate:
Glass; Aluminum; Ceramics; Laminates; Reactive metals; Resins; Selected plastics
3145 RTV Grey Adhesive/Sealant
Bond; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV;
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.;
Manufacturer:
Dow
Substrate:
Glass; Ceramics; Laminates; Reactive metals; Resins; Selected Plastics
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture;
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.;
Manufacturer:
Dow
Substrate:
Glass; A wide variety of surfaces; ABS; Acrylic (primed); Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Metals; Most rubber; Neoprene; Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; PVC; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
Wet-Surface-Patching Purple Package #04003
Sealant; 2-Part; Liquid; Epoxy; Part A/Part B;
A two–component, room temperature cure epoxy system designed as a wet surface patching or gap filling adhesive. It can be used with fiberglass tape as a bonding impregnant and has good resistance to exterior exposure.;
Manufacturer:
Hardman
Substrate:
Glass; Acid etched aluminum; Aluminum; Fiberglass; Metal; Phenolic; Plastics; Stainless Steel; Stone; Wood
Chemical Resistance:
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; VM+P Naphtha
Water-Clear Green Package #04004
Bond; 2-Part; Liquid; Epoxy; Room temperature cure;
Use as an adhesive or coating. Bonds to metal, ceramics, glass, porcelain and wood. Covers and fills scratches. Impact resistant.;
Manufacturer:
Hardman
Substrate:
Glass; Acid etched aluminum; Aluminum; Ceramics; China; Epoxy; Metal; Phenolic; Plastics; Stainless Steel; Wood
Chemical Resistance:
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; Vm and P Naphtha
EP1026
Bond; 2-Part; Liquid; Epoxy; Part A/Part B;
A two part unfilled epoxy adhesive, a tough semi-rigid material, and is free flowing in viscosity, good resistance, MMD equipment.;
Manufacturer:
Resinlab
Substrate:
Glass; Ceramic; 2024 T3 Aluminum Abraded/Mek wipe; Aluminum; Copper; Fabric; Metal; Neoprene; Nylon; Plastic; Polycarbonate; Polyester; Polyvinyl chloride (PVC); Rubber; Steel; Stone; Wood
Chemical Resistance:
Good resistance to
water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Loctite SI 5900
Sealing; 1-Part; Paste; Oxime silicone; Room temperature vulcanizing (RTV);
An excellent adhesion profile to an outstanding wide variety of plastic substrates, as well as glass, ceramics and metals.;
Manufacturer:
Henkel
Substrate:
Glass; Alclad; Aluminum (Alclad) to Steel; Aluminum (Alclad) to Steel; Aluminum 2024-T3
; An outstanding wide variety of plastic substrates; Ceramics; Metals; Mild steel; Stamped sheet metal covers; Zinc dichromate
Chemical Resistance:
5W40 oil; Excellent resistance to automotive engine oils; Glycol; Motor oil; Water
Chemlok AP-134 Primer
Primer; 1-Part; Liquid; Ethanol; Moisture;
A one-coat, moisture-cure primer used to promote adhesion to a variety of polar substrates.;
Manufacturer:
Parker Lord
Substrate:
Architectural glass; Automotive glass; Glass Fabric; A variety of polar substrates; Aluminum; Brass; Ceramic tile; Concrete; E-coated metal; Some plastics; Steel; Vitrified clay pipe
Scotch-Weld Epoxy Adhesive 2216 B/A Gray
Bond; 2-Part; Liquid; Modified Epoxy; Room Temperature cure;
It is a flexible, two-part, room temperature curing epoxy with high peel and shear strength, Resistant to extreme shock, vibration, and flexing.;
Manufacturer:
3M
Substrate:
Glass; ABS Alloy; Aluminum
; Brass; Cold rolled Steel; Copper; Epoxy; Etched Aluminum
; Galvanized Steel; Galvanized Steel; Metal; Plastic; Polyphenylene Oxide; Rubber; Stainless Steel; Steel; Styrene Butadiene Rubber; Wood
Chemical Resistance:
Air; Anti-icing Fluid; Good; Hydraulic oil; Hydrocarbon fluid; JP-4 fuel; Salt spray; Tap water
Dowsil 3140 RTV Coating
Coating; 1-Part; Liquid; Polydimethylsiloxane; RTV;
• A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance ;
Manufacturer:
Dow
Substrate:
Glass; Ceramics; Many reactive metals; Plastics; Resins; Selected laminates
Chemical Resistance:
Good
3145 RTV Clear Adhesive/Sealant
Seal; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.
Manufacturer: Dow
Substrate: Glass; Aluminum; Ceramics; Laminates; Reactive metals; Resins; Selected plastics
3145 RTV Grey Adhesive/Sealant
Bond; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.
Manufacturer: Dow
Substrate: Glass; Ceramics; Laminates; Reactive metals; Resins; Selected Plastics
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Manufacturer: Dow
Substrate: Glass; A wide variety of surfaces; ABS; Acrylic (primed); Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Metals; Most rubber; Neoprene; Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; PVC; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
Wet-Surface-Patching Purple Package #04003
Sealant; 2-Part; Liquid; Epoxy; Part A/Part B
A two–component, room temperature cure epoxy system designed as a wet surface patching or gap filling adhesive. It can be used with fiberglass tape as a bonding impregnant and has good resistance to exterior exposure.
Manufacturer: Hardman
Substrate: Glass; Acid etched aluminum; Aluminum; Fiberglass; Metal; Phenolic; Plastics; Stainless Steel; Stone; Wood
Chemical Resistance: 1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; VM+P Naphtha
Package Sizes
Box of 100
Water-Clear Green Package #04004
Bond; 2-Part; Liquid; Epoxy; Room temperature cure
Use as an adhesive or coating. Bonds to metal, ceramics, glass, porcelain and wood. Covers and fills scratches. Impact resistant.
Manufacturer: Hardman
Substrate: Glass; Acid etched aluminum; Aluminum; Ceramics; China; Epoxy; Metal; Phenolic; Plastics; Stainless Steel; Wood
Chemical Resistance: 1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; Vm and P Naphtha
Package Sizes
Box of 100
EP1026
Bond; 2-Part; Liquid; Epoxy; Part A/Part B
A two part unfilled epoxy adhesive, a tough semi-rigid material, and is free flowing in viscosity, good resistance, MMD equipment.
Manufacturer: Resinlab
Substrate: Glass; Ceramic; 2024 T3 Aluminum Abraded/Mek wipe; Aluminum; Copper; Fabric; Metal; Neoprene; Nylon; Plastic; Polycarbonate; Polyester; Polyvinyl chloride (PVC); Rubber; Steel; Stone; Wood
Chemical Resistance: Good resistance to
water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Package Sizes
Part A Clear Quart Part A Black Quart Part A Clear Gal Part A Black Gal Part A Clear 5 Gal Pail Part B Clear Quart Part B Black Quart Part B Clear Gal Part B Black Gal Part B Clear 5 Gal Pail Clear 4 g Burstable Twinpak Clear 50 ml Cartridge White 50 ml Cartridge Black 50 ml Cartridge Clear 200 ml Cartridge Clear 300 x 300 ml Ratio Pak Cartridge Dark Brown 400 ml Cartridge Clear 400 ml Cartridge Black 400 ml Cartridge Clear 600 ml Cartridge Black 600 ml Cartridge Black 1500 ml Cartridge
Loctite SI 5900
Sealing; 1-Part; Paste; Oxime silicone; Room temperature vulcanizing (RTV)
An excellent adhesion profile to an outstanding wide variety of plastic substrates, as well as glass, ceramics and metals.
Manufacturer: Henkel
Substrate: Glass; Alclad; Aluminum (Alclad) to Steel; Aluminum (Alclad) to Steel; Aluminum 2024-T3
; An outstanding wide variety of plastic substrates; Ceramics; Metals; Mild steel; Stamped sheet metal covers; Zinc dichromate
Chemical Resistance: 5W40 oil; Excellent resistance to automotive engine oils; Glycol; Motor oil; Water
Chemlok AP-134 Primer
Primer; 1-Part; Liquid; Ethanol; Moisture
A one-coat, moisture-cure primer used to promote adhesion to a variety of polar substrates.
Manufacturer: Parker Lord
Substrate: Architectural glass; Automotive glass; Glass Fabric; A variety of polar substrates; Aluminum; Brass; Ceramic tile; Concrete; E-coated metal; Some plastics; Steel; Vitrified clay pipe
Scotch-Weld Epoxy Adhesive 2216 B/A Gray
Bond; 2-Part; Liquid; Modified Epoxy; Room Temperature cure
It is a flexible, two-part, room temperature curing epoxy with high peel and shear strength, Resistant to extreme shock, vibration, and flexing.
Manufacturer: 3M
Substrate: Glass; ABS Alloy; Aluminum
; Brass; Cold rolled Steel; Copper; Epoxy; Etched Aluminum
; Galvanized Steel; Galvanized Steel; Metal; Plastic; Polyphenylene Oxide; Rubber; Stainless Steel; Steel; Styrene Butadiene Rubber; Wood
Chemical Resistance: Air; Anti-icing Fluid; Good; Hydraulic oil; Hydrocarbon fluid; JP-4 fuel; Salt spray; Tap water
Dowsil 3140 RTV Coating
Coating; 1-Part; Liquid; Polydimethylsiloxane; RTV
• A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance
Manufacturer: Dow
Substrate: Glass; Ceramics; Many reactive metals; Plastics; Resins; Selected laminates
Chemical Resistance: Good
Substrate
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Glass; Aluminum; Ceramics; Laminates; Reactive metals; Resins; Selected plastics
Bond; Gaskets; Seal
1-Part
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Clear 90 ml Clear 90 ml to Spec Clear 305 ml Clear 305 ml to Spec Clear 19 kg
Glass; Ceramics; Laminates; Reactive metals; Resins; Selected Plastics
Bond; Gaskets; Seal
1-Part
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Gray 90 ml Gray 90 ml to Spec Gray 305 ml Gray 305 ml to Spec Gray 19 kg
Glass; A wide variety of surfaces; ABS; Acrylic (primed); Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Metals; Most rubber; Neoprene; Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; PVC; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
Bonding; Repairing; Sealing
1-Part
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Glass; Acid etched aluminum; Aluminum; Fiberglass; Metal; Phenolic; Plastics; Stainless Steel; Stone; Wood
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; VM+P Naphtha
Adhesive; Repair; Sealant
2-Part
A two–component, room temperature cure epoxy system designed as a wet surface patching or gap filling adhesive. It can be used with fiberglass tape as a bonding impregnant and has good resistance to exterior exposure.
Glass; Acid etched aluminum; Aluminum; Ceramics; China; Epoxy; Metal; Phenolic; Plastics; Stainless Steel; Wood
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; Vm and P Naphtha
Bond; Coat; Repair
2-Part
Use as an adhesive or coating. Bonds to metal, ceramics, glass, porcelain and wood. Covers and fills scratches. Impact resistant.
Glass; Ceramic; 2024 T3 Aluminum Abraded/Mek wipe; Aluminum; Copper; Fabric; Metal; Neoprene; Nylon; Plastic; Polycarbonate; Polyester; Polyvinyl chloride (PVC); Rubber; Steel; Stone; Wood
Good resistance to
water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Bond
2-Part
A two part unfilled epoxy adhesive, a tough semi-rigid material, and is free flowing in viscosity, good resistance, MMD equipment.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Part A Clear Quart Part A Black Quart Part A Clear Gal Part A Black Gal Part A Clear 5 Gal Pail Part B Clear Quart Part B Black Quart Part B Clear Gal Part B Black Gal Part B Clear 5 Gal Pail Clear 4 g Burstable Twinpak Clear 50 ml Cartridge White 50 ml Cartridge Black 50 ml Cartridge Clear 200 ml Cartridge Clear 300 x 300 ml Ratio Pak Cartridge Dark Brown 400 ml Cartridge Clear 400 ml Cartridge Black 400 ml Cartridge Clear 600 ml Cartridge Black 600 ml Cartridge Black 1500 ml Cartridge
Glass; Alclad; Aluminum (Alclad) to Steel; Aluminum (Alclad) to Steel; Aluminum 2024-T3
; An outstanding wide variety of plastic substrates; Ceramics; Metals; Mild steel; Stamped sheet metal covers; Zinc dichromate
5W40 oil; Excellent resistance to automotive engine oils; Glycol; Motor oil; Water
Sealing
1-Part
An excellent adhesion profile to an outstanding wide variety of plastic substrates, as well as glass, ceramics and metals.
Architectural glass; Automotive glass; Glass Fabric; A variety of polar substrates; Aluminum; Brass; Ceramic tile; Concrete; E-coated metal; Some plastics; Steel; Vitrified clay pipe
Primer
1-Part
A one-coat, moisture-cure primer used to promote adhesion to a variety of polar substrates.
Glass; ABS Alloy; Aluminum
; Brass; Cold rolled Steel; Copper; Epoxy; Etched Aluminum
; Galvanized Steel; Galvanized Steel; Metal; Plastic; Polyphenylene Oxide; Rubber; Stainless Steel; Steel; Styrene Butadiene Rubber; Wood
Air; Anti-icing Fluid; Good; Hydraulic oil; Hydrocarbon fluid; JP-4 fuel; Salt spray; Tap water
Bond
2-Part
It is a flexible, two-part, room temperature curing epoxy with high peel and shear strength, Resistant to extreme shock, vibration, and flexing.
Glass; Ceramics; Many reactive metals; Plastics; Resins; Selected laminates
Good
Adhesive; Coating; Encapsulant; Sealing
1-Part
• A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
493 Gram 493 g to Spec 90 ml Tube 90 ml to Spec 17.6 kg Gray 17.6 kg Pail 17.6 kg to Spec 204.1 kg Gray 201.4 kg Drum
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
