- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
Chemlok AP-134 Primer
Primer; 1-Part; Liquid; Ethanol; Moisture;
A one-coat, moisture-cure primer used to promote adhesion to a variety of polar substrates.;
Manufacturer:
Parker Lord
Substrate:
Aluminum; Brass; E-coated metal; Steel; A variety of polar substrates; Architectural glass; Automotive glass; Ceramic tile; Concrete; Glass Fabric; Some plastics; Vitrified clay pipe
Color:
Clear; Clear Yellow to Amber; Straw Yellow
Viscosity (cPs):
0.0 - 8.0 (cSt)
92-023 Primer
Prime; 2-Part; Liquid; Heptane Solvent; Solvent;
Specially formulated for use with addition-cure silicones to mitigate surface cure poisoning. This clear primer is diluted in heptane solvent and enhances the adhesion of many addition-cure silicones to a wide variety of surfaces.;
Manufacturer:
Dow
Substrate:
Metals; Ceramics; Composites; Glass; Silicone
Color:
Clear
Viscosity (cPs):
0.70
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.;
Manufacturer:
Parker Lord
Substrate:
Grit Blasted Steel; Butyl; Cured Rubber; EPDM; Epoxy; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; Polyvinyl Chloride; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Color:
Clear; Cloudy; Hazy
1200 Prime Coat
Primer; 1-Part; Liquid; Dilute solution of reactive materials
in solvent; Solvent;
It is used to promote adhesion of certain one-part silicone sealants and coatings to a variety of construction materials such as plywood, masonry and metal.;
Manufacturer:
Dow
Substrate:
Metal; Masonry; Plywood
Color:
Clear; Red
Primer 206 G+P
Prime; 1-Part; Liquid; Solvent-Based; Moisture;
A black, moisture-sensitive liquid designed to improve adhesion of Sikaflex® products.;
Manufacturer:
Sika
Substrate:
Steel; ABS; FRP; Glass; Plastics; Polyurethane
Color:
Black
Metal Prep 90 Primer
Primer; 1-Part; Liquid; Isopropyl Alcohol; Solvent;
A chemical primer and conditioner that improves the long-term durability of methacrylate adhesives when used on aluminum or stainless steel surfaces. Cleans metal prior to bonding, fast drying carrier.;
Manufacturer:
Devcon (ITW)
Substrate:
Metals; Stainless Steel
Color:
Transparent red dye; Transparent red dye
Polyolefin Primer (POP)
Primer; 1-Part; Liquid; Solvent-based; Solvent;
It has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond cyanoacrylate adhesives. Colourless liquid appearance.;
Manufacturer:
PermaBond
Substrate:
Mild steel; ETFE; FEP; Fluoropolymers; Low surface energy; PBT; PFA; Plastics; PMP; Polyethylene (PE); Polyolefins; Polypropylene (PP); Polystyrene; Polyurethane; PPS; PTFE; Silicones
Color:
Colourless
Viscosity (cPs):
0.60
Loctite SF 770
Primer; 1-Part; Liquid; Aliphatic amine; Humidity ;
A one part component is a primer used to make polyolefin and other low energy surfaces. It has very low viscosity, transparent to slightly hazy color and recommended for difficult to bond substrates which include
polyethylene, polypropylene, thermoplastic rubber materials.;
Manufacturer:
Henkel
Substrate:
Mild steel (grit blasted); Acetal; HDPE; Other low energy surfaces; Polyethylene; Polyolefin; Polypropylene; Polytetrafluoroethylene (PTFE); Thermoplastic rubber materials; Thermoplastic rubber materials
Color:
Transparent to slightly hazy; Transparent to slightly hazy
Viscosity (cPs):
Very low; 0.62
Primer E 500
Primer; 1-Part; Liquid; Silicone resin; Solvent;
Especially for silicone - for pre-treating non-absorbent surfaces such as aluminium, VA steel, brass, copper, zinc, tinplate and enamel, ceramic and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC etc.
;
Manufacturer:
WEICON
Substrate:
Aluminium; Brass; Copper; Metal surfaces; Tinplate; VA steel; Zinc; ABS; Ceramic; Enamel; GFC; Glass; Non-absorbent surfaces; PA6.6; Plastics; PVC Hard
Color:
Slightly yellow; Transparent
3901
Prime; 1-Part; Liquid; Methyl alcohol; Solvent;
A primer for film and liquid adhesives for improved metal and glass adhesion or improved resistance to environmental exposure with epoxy and urethane adhesives. Protects cleaned surfaces until bonding can be completed. Imparts improved corrosion protection to metal.;
Manufacturer:
3M
Substrate:
Metal; Glass
Color:
Red
Viscosity (cPs):
3.00 to 7
Chemlok AP-134 Primer
Primer; 1-Part; Liquid; Ethanol; Moisture
A one-coat, moisture-cure primer used to promote adhesion to a variety of polar substrates.
Manufacturer: Parker Lord
Substrate: Aluminum; Brass; E-coated metal; Steel; A variety of polar substrates; Architectural glass; Automotive glass; Ceramic tile; Concrete; Glass Fabric; Some plastics; Vitrified clay pipe
Color: Clear; Clear Yellow to Amber; Straw Yellow
Viscosity (cPs): 0.0 - 8.0 (cSt)
92-023 Primer
Prime; 2-Part; Liquid; Heptane Solvent; Solvent
Specially formulated for use with addition-cure silicones to mitigate surface cure poisoning. This clear primer is diluted in heptane solvent and enhances the adhesion of many addition-cure silicones to a wide variety of surfaces.
Manufacturer: Dow
Substrate: Metals; Ceramics; Composites; Glass; Silicone
Color: Clear
Viscosity (cPs): 0.70
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Manufacturer: Parker Lord
Substrate: Grit Blasted Steel; Butyl; Cured Rubber; EPDM; Epoxy; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; Polyvinyl Chloride; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Color: Clear; Cloudy; Hazy
1200 Prime Coat
Primer; 1-Part; Liquid; Dilute solution of reactive materials
in solvent; Solvent
It is used to promote adhesion of certain one-part silicone sealants and coatings to a variety of construction materials such as plywood, masonry and metal.
Manufacturer: Dow
Substrate: Metal; Masonry; Plywood
Color: Clear; Red
Primer 206 G+P
Prime; 1-Part; Liquid; Solvent-Based; Moisture
A black, moisture-sensitive liquid designed to improve adhesion of Sikaflex® products.
Manufacturer: Sika
Substrate: Steel; ABS; FRP; Glass; Plastics; Polyurethane
Color: Black
Metal Prep 90 Primer
Primer; 1-Part; Liquid; Isopropyl Alcohol; Solvent
A chemical primer and conditioner that improves the long-term durability of methacrylate adhesives when used on aluminum or stainless steel surfaces. Cleans metal prior to bonding, fast drying carrier.
Manufacturer: Devcon (ITW)
Substrate: Metals; Stainless Steel
Color: Transparent red dye; Transparent red dye
Package Sizes
Pint
Polyolefin Primer (POP)
Primer; 1-Part; Liquid; Solvent-based; Solvent
It has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond cyanoacrylate adhesives. Colourless liquid appearance.
Manufacturer: PermaBond
Substrate: Mild steel; ETFE; FEP; Fluoropolymers; Low surface energy; PBT; PFA; Plastics; PMP; Polyethylene (PE); Polyolefins; Polypropylene (PP); Polystyrene; Polyurethane; PPS; PTFE; Silicones
Color: Colourless
Viscosity (cPs): 0.60
Loctite SF 770
Primer; 1-Part; Liquid; Aliphatic amine; Humidity
A one part component is a primer used to make polyolefin and other low energy surfaces. It has very low viscosity, transparent to slightly hazy color and recommended for difficult to bond substrates which include
polyethylene, polypropylene, thermoplastic rubber materials.
Manufacturer: Henkel
Substrate: Mild steel (grit blasted); Acetal; HDPE; Other low energy surfaces; Polyethylene; Polyolefin; Polypropylene; Polytetrafluoroethylene (PTFE); Thermoplastic rubber materials; Thermoplastic rubber materials
Color: Transparent to slightly hazy; Transparent to slightly hazy
Viscosity (cPs): Very low; 0.62
Primer E 500
Primer; 1-Part; Liquid; Silicone resin; Solvent
Especially for silicone - for pre-treating non-absorbent surfaces such as aluminium, VA steel, brass, copper, zinc, tinplate and enamel, ceramic and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC etc.
Manufacturer: WEICON
Substrate: Aluminium; Brass; Copper; Metal surfaces; Tinplate; VA steel; Zinc; ABS; Ceramic; Enamel; GFC; Glass; Non-absorbent surfaces; PA6.6; Plastics; PVC Hard
Color: Slightly yellow; Transparent
Package Sizes
WEICON Primer E 500 250 ml
3901
Prime; 1-Part; Liquid; Methyl alcohol; Solvent
A primer for film and liquid adhesives for improved metal and glass adhesion or improved resistance to environmental exposure with epoxy and urethane adhesives. Protects cleaned surfaces until bonding can be completed. Imparts improved corrosion protection to metal.
Manufacturer: 3M
Substrate: Metal; Glass
Color: Red
Viscosity (cPs): 3.00 to 7
Package Sizes
1/2 Pint
Substrate
Application Type
Color
Viscosity
(cPs)
Description
Aluminum; Brass; E-coated metal; Steel; A variety of polar substrates; Architectural glass; Automotive glass; Ceramic tile; Concrete; Glass Fabric; Some plastics; Vitrified clay pipe
Primer
Clear; Clear Yellow to Amber; Straw Yellow
0.0 - 8.0 (cSt)
A one-coat, moisture-cure primer used to promote adhesion to a variety of polar substrates.
Metals; Ceramics; Composites; Glass; Silicone
Prime
Clear
0.70
Specially formulated for use with addition-cure silicones to mitigate surface cure poisoning. This clear primer is diluted in heptane solvent and enhances the adhesion of many addition-cure silicones to a wide variety of surfaces.
Grit Blasted Steel; Butyl; Cured Rubber; EPDM; Epoxy; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; Polyvinyl Chloride; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Primer
Clear; Cloudy; Hazy
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Metal; Masonry; Plywood
Primer
Clear; Red
It is used to promote adhesion of certain one-part silicone sealants and coatings to a variety of construction materials such as plywood, masonry and metal.
Steel; ABS; FRP; Glass; Plastics; Polyurethane
Prime
Black
A black, moisture-sensitive liquid designed to improve adhesion of Sikaflex® products.
Metals; Stainless Steel
Primer
Transparent red dye; Transparent red dye
A chemical primer and conditioner that improves the long-term durability of methacrylate adhesives when used on aluminum or stainless steel surfaces. Cleans metal prior to bonding, fast drying carrier.
Mild steel; ETFE; FEP; Fluoropolymers; Low surface energy; PBT; PFA; Plastics; PMP; Polyethylene (PE); Polyolefins; Polypropylene (PP); Polystyrene; Polyurethane; PPS; PTFE; Silicones
Primer
Colourless
0.60
It has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond cyanoacrylate adhesives. Colourless liquid appearance.
Mild steel (grit blasted); Acetal; HDPE; Other low energy surfaces; Polyethylene; Polyolefin; Polypropylene; Polytetrafluoroethylene (PTFE); Thermoplastic rubber materials; Thermoplastic rubber materials
Primer; Bond
Transparent to slightly hazy; Transparent to slightly hazy
Very low; 0.62
A one part component is a primer used to make polyolefin and other low energy surfaces. It has very low viscosity, transparent to slightly hazy color and recommended for difficult to bond substrates which include
polyethylene, polypropylene, thermoplastic rubber materials.
Aluminium; Brass; Copper; Metal surfaces; Tinplate; VA steel; Zinc; ABS; Ceramic; Enamel; GFC; Glass; Non-absorbent surfaces; PA6.6; Plastics; PVC Hard
Primer
Slightly yellow; Transparent
Especially for silicone - for pre-treating non-absorbent surfaces such as aluminium, VA steel, brass, copper, zinc, tinplate and enamel, ceramic and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC etc.
Metal; Glass
Prime
Red
3.00 to 7
A primer for film and liquid adhesives for improved metal and glass adhesion or improved resistance to environmental exposure with epoxy and urethane adhesives. Protects cleaned surfaces until bonding can be completed. Imparts improved corrosion protection to metal.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
