- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
6634 results
Reset
3145 RTV Clear Adhesive/Sealant
Seal; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV;
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.;
Manufacturer:
Dow
Substrate:
Resins; Selected plastics; Aluminum; Ceramics; Glass; Laminates; Reactive metals
3145 RTV Grey Adhesive/Sealant
Bond; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV;
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.;
Manufacturer:
Dow
Substrate:
Selected Plastics; Ceramics; Glass; Laminates; Reactive metals; Resins
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture;
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.;
Manufacturer:
Dow
Substrate:
ABS; Acrylic (primed); Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; PVC; A wide variety of surfaces; Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Glass; Masonry; Metals; Most rubber; Neoprene; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
OS-30
Liquid Cleaner; 1-Part; Liquid; Volatile methylsiloxanes; Solvent;
Cleaning agent and carrier; non-allergenic; low toxicity; low surface tension; evaporates completely at room temperature; compatible with most plastics and surface treatments.;
Manufacturer:
Dow
Substrate:
Plastics; Contaminated surfaces; Delicate coatings; Delicate surfaces
406 Acrylic Adhesive w/ Accelerator 19
Bond; 2-Part; Paste; Acrylic; Room temperature cure;
A two part component is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive and its bonds a wide range of unprepared metals;
Manufacturer:
Parker Lord
Substrate:
ABS; Acrylic; Engineered plastics; Engineered thermoplastics; Polycarbonate; A wide variety of prepared metals; A wide variety of unprepared metals; Aluminum; Galvanized steel; Metals; Powder coated steel; XENOY®
Chemical Resistance:
Resists alkalis; Resists dilute acids; Resists greases; Resists salt spray; Resists solvents
HP 250
Bond; 2-Part; Liquid; Epoxy; Resin/Hardener;
High performance epoxy with high shear strength, impact toughness for structural assembly applications.;
Manufacturer:
Devcon (ITW)
Substrate:
Nylon; PC; Phenolics; PVC; Rigid plastics; SMC composites; Styrenics; Vinyl esters; AL; Aluminum; FRP composites; Galvanized metals; Galvanized metals; GBS; Metals; Stainless Steel; Wood
Chemical Resistance:
Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.;
Manufacturer:
Parker Lord
Substrate:
Epoxy; Polyurethane; Polyvinyl Chloride; Thermoplastic; TPU; Butyl; Cured Rubber; EPDM; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; various vulcanized, thermoset, and thermoplastic polymeric materials
Loctite 401
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Humidity;
Designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength.;
Manufacturer:
Henkel
Substrate:
ABS; Acrylic; Elastomers; Nylon; Phenolic; Plastics; Polycarbonate; PVC; Absorbent materials; Aluminum (etched); Buna-N; Ceramic; Chipboard; Difficult-to-bond materials; Fabric; Leather; Metals; Neoprene; Nitrile; Paper; Polyester; Porous; Rubber; Steel (degreased); Steel (grit blasted); Wood; Wood (Balsa); Wood (Oak); Zinc Dichromate
Chemical Resistance:
Ethanol; Freon TA; Isopropanol; Isopropyl alcohol; Solvent; Unleaded gasoline; Water/glycol resistance
1100 Fast Set Urethane Adhesive/Sealant
Bonding; 1-Part; Paste; Urethane; Atmospheric moisture;
One part urethane sealant that cures by reaction with atmospheric moisture to form a tough, flexible seal.;
Manufacturer:
Bostik
Substrate:
Most plastics; FRP; Metal; Wood
Flex-221
Bond; 1-Part; Paste; 1-C polyurethane; Humidity;
A high-quality, multi purpose, non-sag, polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. Bonds well to a wide variety of substrates;
Manufacturer:
Sika
Substrate:
Plastics; Ceramic; Metal primers; Metals; Wood
Chemical Resistance:
Caustic solutions; Diluted acids; Fuels; Resistant to
Limewater; Resistant to
Sea water; Resistant to Fresh water; Sewage effluent
3145 RTV Clear Adhesive/Sealant
Seal; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.
Manufacturer: Dow
Substrate: Resins; Selected plastics; Aluminum; Ceramics; Glass; Laminates; Reactive metals
3145 RTV Grey Adhesive/Sealant
Bond; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.
Manufacturer: Dow
Substrate: Selected Plastics; Ceramics; Glass; Laminates; Reactive metals; Resins
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Manufacturer: Dow
Substrate: ABS; Acrylic (primed); Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; PVC; A wide variety of surfaces; Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Glass; Masonry; Metals; Most rubber; Neoprene; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
OS-30
Liquid Cleaner; 1-Part; Liquid; Volatile methylsiloxanes; Solvent
Cleaning agent and carrier; non-allergenic; low toxicity; low surface tension; evaporates completely at room temperature; compatible with most plastics and surface treatments.
Manufacturer: Dow
Substrate: Plastics; Contaminated surfaces; Delicate coatings; Delicate surfaces
406 Acrylic Adhesive w/ Accelerator 19
Bond; 2-Part; Paste; Acrylic; Room temperature cure
A two part component is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive and its bonds a wide range of unprepared metals
Manufacturer: Parker Lord
Substrate: ABS; Acrylic; Engineered plastics; Engineered thermoplastics; Polycarbonate; A wide variety of prepared metals; A wide variety of unprepared metals; Aluminum; Galvanized steel; Metals; Powder coated steel; XENOY®
Chemical Resistance: Resists alkalis; Resists dilute acids; Resists greases; Resists salt spray; Resists solvents
Package Sizes
Base 40 lb Pail Base 40 lb Straight-Side Pail Base 440 lb Drum Accelerator Quart Accelerator 5 Gal Pail (Steel) Accelerator Off-White 55 lb Accelerator Black 55 lb (Straight Side) Accelerator Black 619 lb 50 ml Dual Cartridge 300 ml x 75 ml Dual Cartridge Black 300 ml x 75 ml Dual Cartridge 404 ml Dual Cartridge
HP 250
Bond; 2-Part; Liquid; Epoxy; Resin/Hardener
High performance epoxy with high shear strength, impact toughness for structural assembly applications.
Manufacturer: Devcon (ITW)
Substrate: Nylon; PC; Phenolics; PVC; Rigid plastics; SMC composites; Styrenics; Vinyl esters; AL; Aluminum; FRP composites; Galvanized metals; Galvanized metals; GBS; Metals; Stainless Steel; Wood
Chemical Resistance: Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Manufacturer: Parker Lord
Substrate: Epoxy; Polyurethane; Polyvinyl Chloride; Thermoplastic; TPU; Butyl; Cured Rubber; EPDM; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; various vulcanized, thermoset, and thermoplastic polymeric materials
Loctite 401
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Humidity
Designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength.
Manufacturer: Henkel
Substrate: ABS; Acrylic; Elastomers; Nylon; Phenolic; Plastics; Polycarbonate; PVC; Absorbent materials; Aluminum (etched); Buna-N; Ceramic; Chipboard; Difficult-to-bond materials; Fabric; Leather; Metals; Neoprene; Nitrile; Paper; Polyester; Porous; Rubber; Steel (degreased); Steel (grit blasted); Wood; Wood (Balsa); Wood (Oak); Zinc Dichromate
Chemical Resistance: Ethanol; Freon TA; Isopropanol; Isopropyl alcohol; Solvent; Unleaded gasoline; Water/glycol resistance
1100 Fast Set Urethane Adhesive/Sealant
Bonding; 1-Part; Paste; Urethane; Atmospheric moisture
One part urethane sealant that cures by reaction with atmospheric moisture to form a tough, flexible seal.
Manufacturer: Bostik
Substrate: Most plastics; FRP; Metal; Wood
Flex-221
Bond; 1-Part; Paste; 1-C polyurethane; Humidity
A high-quality, multi purpose, non-sag, polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. Bonds well to a wide variety of substrates
Manufacturer: Sika
Substrate: Plastics; Ceramic; Metal primers; Metals; Wood
Chemical Resistance: Caustic solutions; Diluted acids; Fuels; Resistant to
Limewater; Resistant to
Sea water; Resistant to Fresh water; Sewage effluent
Package Sizes
White 10.1 oz Cartridge Alum Gray 10.1 oz Catridge Colonial White 10.3 oz Cartridge Coping Stone 10.3 oz Cartridge Black 10.3 oz Cartridge White 20 oz Unipac Cartridge Black 20 oz Unipac Alum Gray 20 oz Unipac Cartridge Gray 50 Gal Drum Black 50 Gal Drum White 300 ml Unipac Cartridge Alum Gray 4.5 Gal Pail White 4.5 Gal Pail
Substrate
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Resins; Selected plastics; Aluminum; Ceramics; Glass; Laminates; Reactive metals
Bond; Gaskets; Seal
1-Part
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Clear 90 ml Clear 90 ml to Spec Clear 305 ml Clear 305 ml to Spec Clear 19 kg
Selected Plastics; Ceramics; Glass; Laminates; Reactive metals; Resins
Bond; Gaskets; Seal
1-Part
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Gray 90 ml Gray 90 ml to Spec Gray 305 ml Gray 305 ml to Spec Gray 19 kg
ABS; Acrylic (primed); Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; PVC; A wide variety of surfaces; Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Glass; Masonry; Metals; Most rubber; Neoprene; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
Bonding; Repairing; Sealing
1-Part
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Plastics; Contaminated surfaces; Delicate coatings; Delicate surfaces
Debonder/remover; Liquid Cleaner; Substrate Cleaner
1-Part
Cleaning agent and carrier; non-allergenic; low toxicity; low surface tension; evaporates completely at room temperature; compatible with most plastics and surface treatments.
ABS; Acrylic; Engineered plastics; Engineered thermoplastics; Polycarbonate; A wide variety of prepared metals; A wide variety of unprepared metals; Aluminum; Galvanized steel; Metals; Powder coated steel; XENOY®
Resists alkalis; Resists dilute acids; Resists greases; Resists salt spray; Resists solvents
Bond
2-Part
A two part component is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive and its bonds a wide range of unprepared metals
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Base 40 lb Pail Base 40 lb Straight-Side Pail Base 440 lb Drum Accelerator Quart Accelerator 5 Gal Pail (Steel) Accelerator Off-White 55 lb Accelerator Black 55 lb (Straight Side) Accelerator Black 619 lb 50 ml Dual Cartridge 300 ml x 75 ml Dual Cartridge Black 300 ml x 75 ml Dual Cartridge 404 ml Dual Cartridge
Nylon; PC; Phenolics; PVC; Rigid plastics; SMC composites; Styrenics; Vinyl esters; AL; Aluminum; FRP composites; Galvanized metals; Galvanized metals; GBS; Metals; Stainless Steel; Wood
Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
Bond
2-Part
High performance epoxy with high shear strength, impact toughness for structural assembly applications.
Epoxy; Polyurethane; Polyvinyl Chloride; Thermoplastic; TPU; Butyl; Cured Rubber; EPDM; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; various vulcanized, thermoset, and thermoplastic polymeric materials
Primer
1-Part
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
ABS; Acrylic; Elastomers; Nylon; Phenolic; Plastics; Polycarbonate; PVC; Absorbent materials; Aluminum (etched); Buna-N; Ceramic; Chipboard; Difficult-to-bond materials; Fabric; Leather; Metals; Neoprene; Nitrile; Paper; Polyester; Porous; Rubber; Steel (degreased); Steel (grit blasted); Wood; Wood (Balsa); Wood (Oak); Zinc Dichromate
Ethanol; Freon TA; Isopropanol; Isopropyl alcohol; Solvent; Unleaded gasoline; Water/glycol resistance
Bond; Instant Adhesives
1-Part
Designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength.
Most plastics; FRP; Metal; Wood
Bonding; Sealing
1-Part
One part urethane sealant that cures by reaction with atmospheric moisture to form a tough, flexible seal.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
White 10.1 oz Gray 10.1 oz Black 10.3 oz White 20 oz Gray 20 oz Black 20 oz White 5 Gal Pail Black 5 Gal Pail Black Drum
Plastics; Ceramic; Metal primers; Metals; Wood
Caustic solutions; Diluted acids; Fuels; Resistant to
Limewater; Resistant to
Sea water; Resistant to Fresh water; Sewage effluent
Bond; Seal
1-Part
A high-quality, multi purpose, non-sag, polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. Bonds well to a wide variety of substrates
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
White 10.1 oz Cartridge Alum Gray 10.1 oz Catridge Colonial White 10.3 oz Cartridge Coping Stone 10.3 oz Cartridge Black 10.3 oz Cartridge White 20 oz Unipac Cartridge Black 20 oz Unipac Alum Gray 20 oz Unipac Cartridge Gray 50 Gal Drum Black 50 Gal Drum White 300 ml Unipac Cartridge Alum Gray 4.5 Gal Pail White 4.5 Gal Pail
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
