- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
Loctite AA 352
Coat; 1-Part; Liquid; Acrylic; UV light;
A high viscosity adhesive that creates a tough, flexible bond resistant to vibration and shock. Rapid cure using an activator, UV light, or both.;
Manufacturer:
Henkel
Substrate:
Polycarbonate; ABS; Aluminum; G-10 Epoxyglass; Glass; Metal; PVC; Steel; Steel (grit blasted)
Chemical Resistance:
Air; Boiling water resistance; Heat/Humidity 90% RH; Isopropanol; Solvent; Unleaded gasoline; Water resistance
Loctite AA 3751
Coat; 1-Part; Liquid; Acrylic; UV;
Designed for tacking, bonding, encapsulating, coating and sealing. The product is solvent free and cures in seconds;
Manufacturer:
Henkel
Substrate:
Polycarbonate; Aluminum hex button (grit blasted)
; Epoxyglass; Glass; Phenolic; Steel
Chemical Resistance:
(1) Water glycol 50/50, (2) Condensing Humidity @ 49 C; Salt fog @ 38 C
Silfort AS4700 w/ Basecoat SHP470
Protective hardcoat; 2-Part; Liquid; Silicone; Thermally cured;
A thermally cured abrasion resistant, weatherable silicone hardcoat designed to protect not only clear polycarbonate but also dark colored to black polycarbonate substrates against the effects of harsh environmental components and ultraviolet radiation.;
Manufacturer:
Momentive
Substrate:
Clear polycarbonate; Dark colored to black polycarbonate
Chemical Resistance:
Chemical resistance; Solvent resistance
Loctite 3175
Coat; 1-Part; Liquid; Solvent-Free; UV Cure;
A solvent-free adhesive designed for rapid cure. Excellent for tacking and coating. Good adhesion to plastics.;
Manufacturer:
Henkel
Substrate:
Polycarbonate; Aluminum hex button; Epoxyglass; Glass; Mercury vapor bulbs; Metal; Plastics
; Polyester(PBT); PVC; Thermoset plastic; Valox
Chemical Resistance:
Salt fog; Solvent
HM-302-C2
Coating; 1-Part; Bulk; Thermoplastic hot melt; Pressure sensitive;
A clear, versatile thermoplastic hot melt for coating electrical parts and adhering some plastics. This product also has good adhesion to glass.;
Manufacturer:
Glue Dots
Substrate:
Polycarbonate; Film; Glass; Paper; Polypropylene; Polystyrene; Some plastics
HM-302-01
Coat; 1-Part; Pellets; Hot melt; Hot melt;
A clear, versatile thermoplastic hot melt for coating electrical parts and adhering some plastics. This product also has good adhesion to glass and has ultraviolet light absorber to impair good UV light stability.;
Manufacturer:
Elemelt
Substrate:
Polycarbonate; Glass; Plastics; Polypropylene; Polystyrene; Thermoplastic
Loctite EA 3335
Coat; 1-Part; Liquid; Epoxy; Ultraviolet (UV);
A one-part, medium viscosity, cationic epoxy. Low outgassing, very good high temperature resistance.;
Manufacturer:
Henkel
Substrate:
Polycarbonate; Acrylic; Aluminum (grit blasted); Glass; Metal; Plastics; Steel (grit blasted)
Chemical Resistance:
95% RH; Air; Good Chemical
Resistance; Good Water resistance; Salt fog; Unleaded gasoline
Teroson MS 9305
Protective coating; 1-Part; Liquid; Free of isocyanates; Moisture;
A spray- and gunable, one-component sealant based on silane-modified polymers, which cures by reaction with moisture to an elastic product. It is free of solvents, isocyanates, silicones and PVC.;
Manufacturer:
Henkel
Substrate:
Lexan®; Makrolon®; Polycarbonate; Insulation materials; Many substrates; Plexiglas®; PMMA; PU foams; PU foams
Loctite SI 5055
Coating; 1-Part; Liquid; Alkoxy silicone; Ultraviolet (UV) / Visible light;
A one-component, (UV) visible light curable silicone adhesive specifically designed for use in assembly of disposable medical devices.;
Manufacturer:
Henkel
Substrate:
Polycarbonate; ABS; Aluminum; Glass; Nylon; PBT; PVC; Steel
Loctite 3340
Coat; 1-Part; Liquid; Epoxy; Cationic;
A one-part, rigid, medium viscosity cationic epoxy. Exhibits good thermal, water, and chemical resistance with metal, plastic and glass substrates.;
Manufacturer:
Henkel
Substrate:
Polycarbonate; Acrylic; Aluminum (grit blasted); Glass; Metal; Plastics; Steel (grit blasted)
Chemical Resistance:
95% RH; Air; Chemical resistance; Water
Loctite AA 352
Coat; 1-Part; Liquid; Acrylic; UV light
A high viscosity adhesive that creates a tough, flexible bond resistant to vibration and shock. Rapid cure using an activator, UV light, or both.
Manufacturer: Henkel
Substrate: Polycarbonate; ABS; Aluminum; G-10 Epoxyglass; Glass; Metal; PVC; Steel; Steel (grit blasted)
Chemical Resistance: Air; Boiling water resistance; Heat/Humidity 90% RH; Isopropanol; Solvent; Unleaded gasoline; Water resistance
Loctite AA 3751
Coat; 1-Part; Liquid; Acrylic; UV
Designed for tacking, bonding, encapsulating, coating and sealing. The product is solvent free and cures in seconds
Manufacturer: Henkel
Substrate: Polycarbonate; Aluminum hex button (grit blasted)
; Epoxyglass; Glass; Phenolic; Steel
Chemical Resistance: (1) Water glycol 50/50, (2) Condensing Humidity @ 49 C; Salt fog @ 38 C
Silfort AS4700 w/ Basecoat SHP470
Protective hardcoat; 2-Part; Liquid; Silicone; Thermally cured
A thermally cured abrasion resistant, weatherable silicone hardcoat designed to protect not only clear polycarbonate but also dark colored to black polycarbonate substrates against the effects of harsh environmental components and ultraviolet radiation.
Manufacturer: Momentive
Substrate: Clear polycarbonate; Dark colored to black polycarbonate
Chemical Resistance: Chemical resistance; Solvent resistance
Loctite 3175
Coat; 1-Part; Liquid; Solvent-Free; UV Cure
A solvent-free adhesive designed for rapid cure. Excellent for tacking and coating. Good adhesion to plastics.
Manufacturer: Henkel
Substrate: Polycarbonate; Aluminum hex button; Epoxyglass; Glass; Mercury vapor bulbs; Metal; Plastics
; Polyester(PBT); PVC; Thermoset plastic; Valox
Chemical Resistance: Salt fog; Solvent
HM-302-C2
Coating; 1-Part; Bulk; Thermoplastic hot melt; Pressure sensitive
A clear, versatile thermoplastic hot melt for coating electrical parts and adhering some plastics. This product also has good adhesion to glass.
Manufacturer: Glue Dots
Substrate: Polycarbonate; Film; Glass; Paper; Polypropylene; Polystyrene; Some plastics
HM-302-01
Coat; 1-Part; Pellets; Hot melt; Hot melt
A clear, versatile thermoplastic hot melt for coating electrical parts and adhering some plastics. This product also has good adhesion to glass and has ultraviolet light absorber to impair good UV light stability.
Manufacturer: Elemelt
Substrate: Polycarbonate; Glass; Plastics; Polypropylene; Polystyrene; Thermoplastic
Package Sizes
Hot Melt Adhesive
Loctite EA 3335
Coat; 1-Part; Liquid; Epoxy; Ultraviolet (UV)
A one-part, medium viscosity, cationic epoxy. Low outgassing, very good high temperature resistance.
Manufacturer: Henkel
Substrate: Polycarbonate; Acrylic; Aluminum (grit blasted); Glass; Metal; Plastics; Steel (grit blasted)
Chemical Resistance: 95% RH; Air; Good Chemical
Resistance; Good Water resistance; Salt fog; Unleaded gasoline
Package Sizes
Liter
Teroson MS 9305
Protective coating; 1-Part; Liquid; Free of isocyanates; Moisture
A spray- and gunable, one-component sealant based on silane-modified polymers, which cures by reaction with moisture to an elastic product. It is free of solvents, isocyanates, silicones and PVC.
Manufacturer: Henkel
Substrate: Lexan®; Makrolon®; Polycarbonate; Insulation materials; Many substrates; Plexiglas®; PMMA; PU foams; PU foams
Loctite SI 5055
Coating; 1-Part; Liquid; Alkoxy silicone; Ultraviolet (UV) / Visible light
A one-component, (UV) visible light curable silicone adhesive specifically designed for use in assembly of disposable medical devices.
Manufacturer: Henkel
Substrate: Polycarbonate; ABS; Aluminum; Glass; Nylon; PBT; PVC; Steel
Loctite 3340
Coat; 1-Part; Liquid; Epoxy; Cationic
A one-part, rigid, medium viscosity cationic epoxy. Exhibits good thermal, water, and chemical resistance with metal, plastic and glass substrates.
Manufacturer: Henkel
Substrate: Polycarbonate; Acrylic; Aluminum (grit blasted); Glass; Metal; Plastics; Steel (grit blasted)
Chemical Resistance: 95% RH; Air; Chemical resistance; Water
Substrate
Application Type
Chemical Resistance
1 Part or 2 Part
Description
Polycarbonate; ABS; Aluminum; G-10 Epoxyglass; Glass; Metal; PVC; Steel; Steel (grit blasted)
Coat; Bond; Instant Adhesives; Seal
Air; Boiling water resistance; Heat/Humidity 90% RH; Isopropanol; Solvent; Unleaded gasoline; Water resistance
1-Part
A high viscosity adhesive that creates a tough, flexible bond resistant to vibration and shock. Rapid cure using an activator, UV light, or both.
Polycarbonate; Aluminum hex button (grit blasted)
; Epoxyglass; Glass; Phenolic; Steel
Coat; Bond; Encapsulate; Instant Adhesives; Seal
(1) Water glycol 50/50, (2) Condensing Humidity @ 49 C; Salt fog @ 38 C
1-Part
Designed for tacking, bonding, encapsulating, coating and sealing. The product is solvent free and cures in seconds
Clear polycarbonate; Dark colored to black polycarbonate
Protective hardcoat
Chemical resistance; Solvent resistance
2-Part
A thermally cured abrasion resistant, weatherable silicone hardcoat designed to protect not only clear polycarbonate but also dark colored to black polycarbonate substrates against the effects of harsh environmental components and ultraviolet radiation.
Polycarbonate; Aluminum hex button; Epoxyglass; Glass; Mercury vapor bulbs; Metal; Plastics
; Polyester(PBT); PVC; Thermoset plastic; Valox
Coat; Bond; Encapsulant; Instant Adhesives; Seal
Salt fog; Solvent
1-Part
A solvent-free adhesive designed for rapid cure. Excellent for tacking and coating. Good adhesion to plastics.
Polycarbonate; Film; Glass; Paper; Polypropylene; Polystyrene; Some plastics
Coating; Bond; Sealing
1-Part
A clear, versatile thermoplastic hot melt for coating electrical parts and adhering some plastics. This product also has good adhesion to glass.
Polycarbonate; Glass; Plastics; Polypropylene; Polystyrene; Thermoplastic
Coat
1-Part
A clear, versatile thermoplastic hot melt for coating electrical parts and adhering some plastics. This product also has good adhesion to glass and has ultraviolet light absorber to impair good UV light stability.
Polycarbonate; Acrylic; Aluminum (grit blasted); Glass; Metal; Plastics; Steel (grit blasted)
Coat; Bond; Instant Adhesives; Tacking
95% RH; Air; Good Chemical
Resistance; Good Water resistance; Salt fog; Unleaded gasoline
1-Part
A one-part, medium viscosity, cationic epoxy. Low outgassing, very good high temperature resistance.
Lexan®; Makrolon®; Polycarbonate; Insulation materials; Many substrates; Plexiglas®; PMMA; PU foams; PU foams
Protective coating; Sealant
1-Part
A spray- and gunable, one-component sealant based on silane-modified polymers, which cures by reaction with moisture to an elastic product. It is free of solvents, isocyanates, silicones and PVC.
Polycarbonate; ABS; Aluminum; Glass; Nylon; PBT; PVC; Steel
Coating; Bonding; Potting; Sealing
1-Part
A one-component, (UV) visible light curable silicone adhesive specifically designed for use in assembly of disposable medical devices.
Polycarbonate; Acrylic; Aluminum (grit blasted); Glass; Metal; Plastics; Steel (grit blasted)
Coat; Bond; Instant Adhesives; Tacking
95% RH; Air; Chemical resistance; Water
1-Part
A one-part, rigid, medium viscosity cationic epoxy. Exhibits good thermal, water, and chemical resistance with metal, plastic and glass substrates.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
