- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.;
Manufacturer:
Parker Lord
Substrate:
Polyurethane; TPU; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyvinyl Chloride; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; various vulcanized, thermoset, and thermoplastic polymeric materials
7545 Urethane Adhesive w/ C Curative
Bond; 2-Part; Paste; Urethane; 2-Part Cure;
An equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation, It is Durable, Non-flammable, not contain ozone depleting chemicals.;
Manufacturer:
Parker Lord
Substrate:
TPU; FRP; Other plastics with little surface preparation; Overhead surfaces; Primed Metals; SMC; Various combinations of dissimilar substrates; Vertical Surfaces
Chemical Resistance:
Chemically Resistant; Resists salt spray ; Solvent resistance
7610
Bond; 1-Part; Paste; Urethane; Moisture;
Single-pack, moisture cure urethane adhesive/sealant.;
Manufacturer:
Parker Lord
Substrate:
TPU; ABS; Especially precoated metals; Fabrics; Grit Blasted Aluminum; Grit Blasted CRS; Marine Grade Plywood; Metals; Plastics; Polycarbonate; Scuffed FRP; Scuffed SMC; Solvent-Wiped Glass; Stone; Wood
Chemical Resistance:
Solvent
102
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Moisture;
A Single component, low viscosity general purpose cyanoacrylate adhesive, bonding product useful in applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.;
Manufacturer:
PermaBond
Substrate:
Polyurethane; Aluminum; Bonding close-fitting components; Buna N Rubber; Epoxies; Grit blasted steel; Melamine; Metals; Most materials; Nylon; Phenolic; Plastics; Polyesters; Polyethylene; Polypropylene; PTFE; Rubber; Silicone; Steel; Urea formaldehyde
Chemical Resistance:
Air Reference; Dioctyl phthalate; Ethanol; Gasoline; Isopropanol; Motor oil; Solvent; Water resistance
304-1/304-2
Bond; 2-Part; Paste; Epoxy; Heat;
A general purpose, high viscosity, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface.;
Manufacturer:
Parker Lord
Substrate:
TPU; Alumimum; Ceramic; Cold Rolled Steel; Fiberglass reinforced plastics (FRP); Fiberglass reinforced plastics (FRP); Glass; Natural Rubber; phenolic; Prepared metals; Prepared Rubber; Sheet Molded Compound (SMC); Styrene Butadiene Rubber (SBR); Wood
Chemical Resistance:
alkalis; Chemical resistance; Dilute acids; greases; oils; Solvent resistance
7650
Bond; 1-Part; Liquid; Urethane; Moisture;
A single-pack, moisture-cure urethane adhesive. It offers good initial tack and green strength and works life a contact adhesive, however, as the cure develops, the adhesive becomes permanently cross-linked.;
Manufacturer:
Parker Lord
Substrate:
TPU; Aluminum; Concrete; Epoxy primed Galvanized Steel; Epoxy primed Galvanized Steel; Fabric; Metal; Open cell polyethylene foam; Open cell polyethylene foam; Plastic; Prepared Metal; Rubber; Steel; Styrofoam; Styrofoam; Vinyl; Wide variety of substrates
Chemical Resistance:
Good Chemical resistance; Good water resistance
Silicone Brown Package #04030
Bond; 1-Part; Paste; Silicone; Atmospheric Moisture;
A one-part silicone sealant that cures in the presence of atmospheric moisture to a durable, flexible rubber, which has excellent adhesion to most non-porous surfaces.;
Manufacturer:
Hardman
Substrate:
Polyurethane; ABS; Acetate; Acrylic; Carbon steel; Ceramics; China; Epoxy; Fiberglass; Flexible rubber; Glass; Metal; Non-porous; Nylon; Phenolic; Plastics; Polycarbonate; Polyester; Polystyrene; Porcelain; PVC; Wood
7542 Urethane Adhesive w/ C Curative
Bond; 2-Part; Liquid; Urethane; 2-Part Cure;
Equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation.;
Manufacturer:
Parker Lord
Substrate:
TPU; FRP; Other plastics; Primed metals; SMC
Chemical Resistance:
Resists salt spray; Solvent resistance
5952
Bond; 1-Part; Tape; Acrylic; Pressure sensitive;
Dark Gray, closed-cell acrylic foam carrier • Very conformable • Good adhesion to many painted surfaces, including powder coated paint •Apply as low as 50°F (10°C) • UL 746C;
Manufacturer:
3M
Substrate:
Polyurethane paint; ABS; Acrylic paint; Aluminum
; Cellulose Acetate Butyrate; Enameled Steel; Epoxy paint; Foam; Galvanized Steel; Galvanized Steel; Glass (with or
without silane coating); Glass epoxy; Noryl® (PPE) polyphenenlene ether; Paint; Polybutylene terephthalate; Polycarbonate; Polyester; Polyester paint; Primer 94 coated polycarbonate; Rigid PVC; Stainless Steel; Uncoated Glass
Chemical Resistance:
Excellent solvent resistance
Multi-Cure 605
Bond; 1-Part; Liquid- Gel; No Nonreactive Solvents; UV/Visible light;
• UV/Visible Light Cure • Secondary Heat Cure • Activator Cure • Resilient Bonds • Different Viscosities Available • Glass Assembly • Metal Brackets to Glass •
;
Manufacturer:
Dymax
Substrate:
PU Polyurethane, Limited Applications; ABS; Limited applications; Aluminum; Ceramic; Cold Rolled Steel; Copper; Ferrite; Glass: Borosillicate, Quartz, Mica; Metal; Nylon; PA Polyamide; PBT, Limited Applications; PET, Limited Applications; Phenolic; Phosphated Steel; PMMA Poly (methyl methacrylate), Limited Applications; Polybutylene; Stainless Steel; Steel
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Manufacturer: Parker Lord
Substrate: Polyurethane; TPU; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyvinyl Chloride; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; various vulcanized, thermoset, and thermoplastic polymeric materials
7545 Urethane Adhesive w/ C Curative
Bond; 2-Part; Paste; Urethane; 2-Part Cure
An equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation, It is Durable, Non-flammable, not contain ozone depleting chemicals.
Manufacturer: Parker Lord
Substrate: TPU; FRP; Other plastics with little surface preparation; Overhead surfaces; Primed Metals; SMC; Various combinations of dissimilar substrates; Vertical Surfaces
Chemical Resistance: Chemically Resistant; Resists salt spray ; Solvent resistance
7610
Bond; 1-Part; Paste; Urethane; Moisture
Single-pack, moisture cure urethane adhesive/sealant.
Manufacturer: Parker Lord
Substrate: TPU; ABS; Especially precoated metals; Fabrics; Grit Blasted Aluminum; Grit Blasted CRS; Marine Grade Plywood; Metals; Plastics; Polycarbonate; Scuffed FRP; Scuffed SMC; Solvent-Wiped Glass; Stone; Wood
Chemical Resistance: Solvent
102
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Moisture
A Single component, low viscosity general purpose cyanoacrylate adhesive, bonding product useful in applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.
Manufacturer: PermaBond
Substrate: Polyurethane; Aluminum; Bonding close-fitting components; Buna N Rubber; Epoxies; Grit blasted steel; Melamine; Metals; Most materials; Nylon; Phenolic; Plastics; Polyesters; Polyethylene; Polypropylene; PTFE; Rubber; Silicone; Steel; Urea formaldehyde
Chemical Resistance: Air Reference; Dioctyl phthalate; Ethanol; Gasoline; Isopropanol; Motor oil; Solvent; Water resistance
304-1/304-2
Bond; 2-Part; Paste; Epoxy; Heat
A general purpose, high viscosity, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface.
Manufacturer: Parker Lord
Substrate: TPU; Alumimum; Ceramic; Cold Rolled Steel; Fiberglass reinforced plastics (FRP); Fiberglass reinforced plastics (FRP); Glass; Natural Rubber; phenolic; Prepared metals; Prepared Rubber; Sheet Molded Compound (SMC); Styrene Butadiene Rubber (SBR); Wood
Chemical Resistance: alkalis; Chemical resistance; Dilute acids; greases; oils; Solvent resistance
7650
Bond; 1-Part; Liquid; Urethane; Moisture
A single-pack, moisture-cure urethane adhesive. It offers good initial tack and green strength and works life a contact adhesive, however, as the cure develops, the adhesive becomes permanently cross-linked.
Manufacturer: Parker Lord
Substrate: TPU; Aluminum; Concrete; Epoxy primed Galvanized Steel; Epoxy primed Galvanized Steel; Fabric; Metal; Open cell polyethylene foam; Open cell polyethylene foam; Plastic; Prepared Metal; Rubber; Steel; Styrofoam; Styrofoam; Vinyl; Wide variety of substrates
Chemical Resistance: Good Chemical resistance; Good water resistance
Silicone Brown Package #04030
Bond; 1-Part; Paste; Silicone; Atmospheric Moisture
A one-part silicone sealant that cures in the presence of atmospheric moisture to a durable, flexible rubber, which has excellent adhesion to most non-porous surfaces.
Manufacturer: Hardman
Substrate: Polyurethane; ABS; Acetate; Acrylic; Carbon steel; Ceramics; China; Epoxy; Fiberglass; Flexible rubber; Glass; Metal; Non-porous; Nylon; Phenolic; Plastics; Polycarbonate; Polyester; Polystyrene; Porcelain; PVC; Wood
Package Sizes
Box of 100
7542 Urethane Adhesive w/ C Curative
Bond; 2-Part; Liquid; Urethane; 2-Part Cure
Equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation.
Manufacturer: Parker Lord
Substrate: TPU; FRP; Other plastics; Primed metals; SMC
Chemical Resistance: Resists salt spray; Solvent resistance
5952
Bond; 1-Part; Tape; Acrylic; Pressure sensitive
Dark Gray, closed-cell acrylic foam carrier • Very conformable • Good adhesion to many painted surfaces, including powder coated paint •Apply as low as 50°F (10°C) • UL 746C
Manufacturer: 3M
Substrate: Polyurethane paint; ABS; Acrylic paint; Aluminum
; Cellulose Acetate Butyrate; Enameled Steel; Epoxy paint; Foam; Galvanized Steel; Galvanized Steel; Glass (with or
without silane coating); Glass epoxy; Noryl® (PPE) polyphenenlene ether; Paint; Polybutylene terephthalate; Polycarbonate; Polyester; Polyester paint; Primer 94 coated polycarbonate; Rigid PVC; Stainless Steel; Uncoated Glass
Chemical Resistance: Excellent solvent resistance
Multi-Cure 605
Bond; 1-Part; Liquid- Gel; No Nonreactive Solvents; UV/Visible light
• UV/Visible Light Cure • Secondary Heat Cure • Activator Cure • Resilient Bonds • Different Viscosities Available • Glass Assembly • Metal Brackets to Glass •
Manufacturer: Dymax
Substrate: PU Polyurethane, Limited Applications; ABS; Limited applications; Aluminum; Ceramic; Cold Rolled Steel; Copper; Ferrite; Glass: Borosillicate, Quartz, Mica; Metal; Nylon; PA Polyamide; PBT, Limited Applications; PET, Limited Applications; Phenolic; Phosphated Steel; PMMA Poly (methyl methacrylate), Limited Applications; Polybutylene; Stainless Steel; Steel
Substrate
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Polyurethane; TPU; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyvinyl Chloride; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; various vulcanized, thermoset, and thermoplastic polymeric materials
Primer
1-Part
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
TPU; FRP; Other plastics with little surface preparation; Overhead surfaces; Primed Metals; SMC; Various combinations of dissimilar substrates; Vertical Surfaces
Chemically Resistant; Resists salt spray ; Solvent resistance
Bond
2-Part
An equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation, It is Durable, Non-flammable, not contain ozone depleting chemicals.
TPU; ABS; Especially precoated metals; Fabrics; Grit Blasted Aluminum; Grit Blasted CRS; Marine Grade Plywood; Metals; Plastics; Polycarbonate; Scuffed FRP; Scuffed SMC; Solvent-Wiped Glass; Stone; Wood
Solvent
Bond; Seal
1-Part
Single-pack, moisture cure urethane adhesive/sealant.
Polyurethane; Aluminum; Bonding close-fitting components; Buna N Rubber; Epoxies; Grit blasted steel; Melamine; Metals; Most materials; Nylon; Phenolic; Plastics; Polyesters; Polyethylene; Polypropylene; PTFE; Rubber; Silicone; Steel; Urea formaldehyde
Air Reference; Dioctyl phthalate; Ethanol; Gasoline; Isopropanol; Motor oil; Solvent; Water resistance
Bond; Instant Adhesives
1-Part
A Single component, low viscosity general purpose cyanoacrylate adhesive, bonding product useful in applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.
TPU; Alumimum; Ceramic; Cold Rolled Steel; Fiberglass reinforced plastics (FRP); Fiberglass reinforced plastics (FRP); Glass; Natural Rubber; phenolic; Prepared metals; Prepared Rubber; Sheet Molded Compound (SMC); Styrene Butadiene Rubber (SBR); Wood
alkalis; Chemical resistance; Dilute acids; greases; oils; Solvent resistance
Bond
2-Part
A general purpose, high viscosity, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Resin Quart Resin Gallon Resin 5 Gal Pail Hardener Quart Hardener Gallon Hardener 5 Gal Pail
TPU; Aluminum; Concrete; Epoxy primed Galvanized Steel; Epoxy primed Galvanized Steel; Fabric; Metal; Open cell polyethylene foam; Open cell polyethylene foam; Plastic; Prepared Metal; Rubber; Steel; Styrofoam; Styrofoam; Vinyl; Wide variety of substrates
Good Chemical resistance; Good water resistance
Bond; Gaskets
1-Part
A single-pack, moisture-cure urethane adhesive. It offers good initial tack and green strength and works life a contact adhesive, however, as the cure develops, the adhesive becomes permanently cross-linked.
Polyurethane; ABS; Acetate; Acrylic; Carbon steel; Ceramics; China; Epoxy; Fiberglass; Flexible rubber; Glass; Metal; Non-porous; Nylon; Phenolic; Plastics; Polycarbonate; Polyester; Polystyrene; Porcelain; PVC; Wood
Bond; Seal
1-Part
A one-part silicone sealant that cures in the presence of atmospheric moisture to a durable, flexible rubber, which has excellent adhesion to most non-porous surfaces.
TPU; FRP; Other plastics; Primed metals; SMC
Resists salt spray; Solvent resistance
Bond
2-Part
Equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Base 638 lb Drum Hardener 50 lb Pail Hardener 570 lb Drum 200 ml Dual Cartridge Base 1/2 Pint Base 58 lb Pail
Polyurethane paint; ABS; Acrylic paint; Aluminum
; Cellulose Acetate Butyrate; Enameled Steel; Epoxy paint; Foam; Galvanized Steel; Galvanized Steel; Glass (with or
without silane coating); Glass epoxy; Noryl® (PPE) polyphenenlene ether; Paint; Polybutylene terephthalate; Polycarbonate; Polyester; Polyester paint; Primer 94 coated polycarbonate; Rigid PVC; Stainless Steel; Uncoated Glass
Excellent solvent resistance
Bond
1-Part
Dark Gray, closed-cell acrylic foam carrier • Very conformable • Good adhesion to many painted surfaces, including powder coated paint •Apply as low as 50°F (10°C) • UL 746C
PU Polyurethane, Limited Applications; ABS; Limited applications; Aluminum; Ceramic; Cold Rolled Steel; Copper; Ferrite; Glass: Borosillicate, Quartz, Mica; Metal; Nylon; PA Polyamide; PBT, Limited Applications; PET, Limited Applications; Phenolic; Phosphated Steel; PMMA Poly (methyl methacrylate), Limited Applications; Polybutylene; Stainless Steel; Steel
Bond; Instant Adhesives
1-Part
• UV/Visible Light Cure • Secondary Heat Cure • Activator Cure • Resilient Bonds • Different Viscosities Available • Glass Assembly • Metal Brackets to Glass •
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
