- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
1459 results
Reset
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture;
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.;
Manufacturer:
Dow
Substrate:
PVC; A wide variety of surfaces; ABS; Acrylic (primed); Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Glass; Masonry; Metals; Most rubber; Neoprene; Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
UR3010
Encapsulate; 2-Part; Liquid; Polyurethane; 2-Part Cure;
A two component, room temperature curing polyurethane potting system. It is designed to cure completely at room temperature.
;
Manufacturer:
Resinlab
Substrate:
Polyvinyl chloride (PVC); Ceramic; Aluminum; Metals; Plastic; Polycarbonate; Polyester; Steel
Chemical Resistance:
Inorganic acids; Inorganic bases; Organic solvents; Salt spray; Very good resistance to water
HP 250
Bond; 2-Part; Liquid; Epoxy; Resin/Hardener;
High performance epoxy with high shear strength, impact toughness for structural assembly applications.;
Manufacturer:
Devcon (ITW)
Substrate:
PVC; AL; Aluminum; FRP composites; Galvanized metals; Galvanized metals; GBS; Metals; Nylon; PC; Phenolics; Rigid plastics; SMC composites; Stainless Steel; Styrenics; Vinyl esters; Wood
Chemical Resistance:
Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.;
Manufacturer:
Parker Lord
Substrate:
Polyvinyl Chloride; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Loctite 401
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Humidity;
Designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength.;
Manufacturer:
Henkel
Substrate:
PVC; ABS; Absorbent materials; Acrylic; Aluminum (etched); Buna-N; Ceramic; Chipboard; Difficult-to-bond materials; Elastomers; Fabric; Leather; Metals; Neoprene; Nitrile; Nylon; Paper; Phenolic; Plastics; Polycarbonate; Polyester; Porous; Rubber; Steel (degreased); Steel (grit blasted); Wood; Wood (Balsa); Wood (Oak); Zinc Dichromate
Chemical Resistance:
Ethanol; Freon TA; Isopropanol; Isopropyl alcohol; Solvent; Unleaded gasoline; Water/glycol resistance
16
Bond; 1-Part; Liquid; Cement; Solvent;
Fast-setting, medium bodied, high strength acrylic cement. Also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.;
Manufacturer:
SCIGRIP (Weld-On)
Substrate:
PVC; ABS; Acrylic; Acrylic plastic; Butyrate; Polycarbonate; Polystyrene; Porous; Styrene
Chemical Resistance:
Water resistant
EP1056LC
Bond; 2-Part; Liquid; Epoxy; Part A/Part B;
Two part urethane modified epoxy adhesive, good gap filling ability and prevent running and sagging during cure, very good resistance to water, acids and bases and most organic solvents.;
Manufacturer:
Resinlab
Substrate:
Polyvinyl chloride (PVC); Ceramic; Aluminum; Copper; Fabric; Glass; Hard to bond substrates; Metal; Neoprene; Nylon; Plastic; Polycarbonate; Polyester; Rubber; Steel; Stone; Wood
Chemical Resistance:
Inorganic acids; Inorganic bases; Most Organic solvents; Salt spray; Very good resistance to water
DP460
Bond; 2-Part; Liquid; Epoxy; Base/Accelerator;
Long worklife toughened epoxy • 2-4 hrs. handling strength;
Manufacturer:
3M
Substrate:
PVC; ABS; Aluminum; Aluminum(Abrade); Brass; Brass (Abrade); Cold rolled Steel (Abrade); Cold Rolled Steel (Abraded)
; Cold Rolled Steel (Oakite degrease)
; Copper (Abrade); Etched Aluminum; FRP; Galvanized Steel (Electrodeposited); Galvanized Steel (Electrodeposited); Galvanized Steel (Hot dipped)
; Galvanized Steel (Hot dipped)
; Galvanized Steel (Oakite degrease)
; Galvanized Steel (Oakite degrease)
; Metal; Neoprene; Phenolic; PolyAcrylic; Polycarbonate; Polystryene; SBR; Stainless Steel (Abrade); Steel
EP11HT
Bond; 2-Part; Thixotropic paste; Epoxy; Part A/Part B;
A two part filled epoxy adhesive, room temperature to a tough, semi-rigid material, good wetting to most surfaces and is very thixotropic to resist running and sagging, very good vibration and impact resistance.;
Manufacturer:
Resinlab
Substrate:
Polyvinyl chloride (PVC); Ceramic; 2024 T3 Aluminum Abraded/Mek wipe; Aluminum; Copper; Fabric; Glass; Metal; Neoprene; Nylon; Other various substrates; Plastic; Polycarbonate; Polyester; Rubber; Steel; Stone; Wood
Chemical Resistance:
Good resistance to water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Loctite AA 3105
Bond; 1-Part; Liquid; Acrylated urethane; Ultraviolet (UV)/ visible light;
A high strength, low viscosity adhesive. Primarily designed for bonding rigid and flexible PVC to polycarbonate. Recommended for applications involving small gaps less than 0.25 mm.;
Manufacturer:
Henkel
Substrate:
PVC; Rigid or flexible PVC; ABS; Acrylic; Aluminum; Aluminum (etched); Epoxyglass; Glass; Metals; Nylon; Phenolic; Plastics; Polybutylene Terephthalate (PBT); Polycarbonate; Steel
Chemical Resistance:
Boiling water; Heat/humidity; Isopropanol; Solvent
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Manufacturer: Dow
Substrate: PVC; A wide variety of surfaces; ABS; Acrylic (primed); Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Glass; Masonry; Metals; Most rubber; Neoprene; Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
UR3010
Encapsulate; 2-Part; Liquid; Polyurethane; 2-Part Cure
A two component, room temperature curing polyurethane potting system. It is designed to cure completely at room temperature.
Manufacturer: Resinlab
Substrate: Polyvinyl chloride (PVC); Ceramic; Aluminum; Metals; Plastic; Polycarbonate; Polyester; Steel
Chemical Resistance: Inorganic acids; Inorganic bases; Organic solvents; Salt spray; Very good resistance to water
Package Sizes
Part A Clear Quart Part A Black Quart Part A Clear Gal Part A Black Gal Part A Clear 5 Gal Pail Part A Black 5 Gal Pail Part B Clear Quart Part B Black Quart Part B Clear Gal Part B Black Gal Part B Clear 5 Gal Pail Part B Black 5 Gal Pail Clear 50 ml Cartridge Black 50 ml Cartridge Clear 200 ml Cartridge Black 200 ml Cartridge Clear 400 ml Cartridge Black 400 ml Cartridge 400 ml Cartridge Clear 600 ml Cartridge Black 600 ml Cartridge
HP 250
Bond; 2-Part; Liquid; Epoxy; Resin/Hardener
High performance epoxy with high shear strength, impact toughness for structural assembly applications.
Manufacturer: Devcon (ITW)
Substrate: PVC; AL; Aluminum; FRP composites; Galvanized metals; Galvanized metals; GBS; Metals; Nylon; PC; Phenolics; Rigid plastics; SMC composites; Stainless Steel; Styrenics; Vinyl esters; Wood
Chemical Resistance: Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Manufacturer: Parker Lord
Substrate: Polyvinyl Chloride; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Loctite 401
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Humidity
Designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength.
Manufacturer: Henkel
Substrate: PVC; ABS; Absorbent materials; Acrylic; Aluminum (etched); Buna-N; Ceramic; Chipboard; Difficult-to-bond materials; Elastomers; Fabric; Leather; Metals; Neoprene; Nitrile; Nylon; Paper; Phenolic; Plastics; Polycarbonate; Polyester; Porous; Rubber; Steel (degreased); Steel (grit blasted); Wood; Wood (Balsa); Wood (Oak); Zinc Dichromate
Chemical Resistance: Ethanol; Freon TA; Isopropanol; Isopropyl alcohol; Solvent; Unleaded gasoline; Water/glycol resistance
16
Bond; 1-Part; Liquid; Cement; Solvent
Fast-setting, medium bodied, high strength acrylic cement. Also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
Manufacturer: SCIGRIP (Weld-On)
Substrate: PVC; ABS; Acrylic; Acrylic plastic; Butyrate; Polycarbonate; Polystyrene; Porous; Styrene
Chemical Resistance: Water resistant
EP1056LC
Bond; 2-Part; Liquid; Epoxy; Part A/Part B
Two part urethane modified epoxy adhesive, good gap filling ability and prevent running and sagging during cure, very good resistance to water, acids and bases and most organic solvents.
Manufacturer: Resinlab
Substrate: Polyvinyl chloride (PVC); Ceramic; Aluminum; Copper; Fabric; Glass; Hard to bond substrates; Metal; Neoprene; Nylon; Plastic; Polycarbonate; Polyester; Rubber; Steel; Stone; Wood
Chemical Resistance: Inorganic acids; Inorganic bases; Most Organic solvents; Salt spray; Very good resistance to water
DP460
Bond; 2-Part; Liquid; Epoxy; Base/Accelerator
Long worklife toughened epoxy • 2-4 hrs. handling strength
Manufacturer: 3M
Substrate: PVC; ABS; Aluminum; Aluminum(Abrade); Brass; Brass (Abrade); Cold rolled Steel (Abrade); Cold Rolled Steel (Abraded)
; Cold Rolled Steel (Oakite degrease)
; Copper (Abrade); Etched Aluminum; FRP; Galvanized Steel (Electrodeposited); Galvanized Steel (Electrodeposited); Galvanized Steel (Hot dipped)
; Galvanized Steel (Hot dipped)
; Galvanized Steel (Oakite degrease)
; Galvanized Steel (Oakite degrease)
; Metal; Neoprene; Phenolic; PolyAcrylic; Polycarbonate; Polystryene; SBR; Stainless Steel (Abrade); Steel
EP11HT
Bond; 2-Part; Thixotropic paste; Epoxy; Part A/Part B
A two part filled epoxy adhesive, room temperature to a tough, semi-rigid material, good wetting to most surfaces and is very thixotropic to resist running and sagging, very good vibration and impact resistance.
Manufacturer: Resinlab
Substrate: Polyvinyl chloride (PVC); Ceramic; 2024 T3 Aluminum Abraded/Mek wipe; Aluminum; Copper; Fabric; Glass; Metal; Neoprene; Nylon; Other various substrates; Plastic; Polycarbonate; Polyester; Rubber; Steel; Stone; Wood
Chemical Resistance: Good resistance to water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Package Sizes
Part A Gray Quart Part A Gray Gal Part A Gray 5 Gal Pail Part B Gray Quart Part B Gray Gal Part B Gray 5 Gal Pail Gray 6 oz Barrier Techkit Red 10 ml Dual Syringe Red 50 ml Cartridge White 50 ml Cartridge Gray 50 ml Cartridge Gray 150 x 150 ml Ratio Pak Cartridge Gray 200 ml Cartridge Gray 300 x 300 ml Ratio Pak Cartridge Gray 400 ml Cartridge Gray 600 ml Cartridge Gray 1/2 Pint Kit
Loctite AA 3105
Bond; 1-Part; Liquid; Acrylated urethane; Ultraviolet (UV)/ visible light
A high strength, low viscosity adhesive. Primarily designed for bonding rigid and flexible PVC to polycarbonate. Recommended for applications involving small gaps less than 0.25 mm.
Manufacturer: Henkel
Substrate: PVC; Rigid or flexible PVC; ABS; Acrylic; Aluminum; Aluminum (etched); Epoxyglass; Glass; Metals; Nylon; Phenolic; Plastics; Polybutylene Terephthalate (PBT); Polycarbonate; Steel
Chemical Resistance: Boiling water; Heat/humidity; Isopropanol; Solvent
Substrate
Chemical Resistance
Application Type
1 Part or 2 Part
Description
PVC; A wide variety of surfaces; ABS; Acrylic (primed); Aluminum, anodized; Aluminum, milled; Brass; Carbon; Concrete; Glass; Masonry; Metals; Most rubber; Neoprene; Phenolic (G-10); Plastics; Polycarbonate (primed); Polycarbonate (unprimed); Polystyrene; Silicone rubber; Stainless steel; Steel; Steel, galvanized; Steel, galvanized; Steel, millled; Wrought Iron
Bonding; Repairing; Sealing
1-Part
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Polyvinyl chloride (PVC); Ceramic; Aluminum; Metals; Plastic; Polycarbonate; Polyester; Steel
Inorganic acids; Inorganic bases; Organic solvents; Salt spray; Very good resistance to water
Encapsulate; Potting
2-Part
A two component, room temperature curing polyurethane potting system. It is designed to cure completely at room temperature.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Part A Clear Quart Part A Black Quart Part A Clear Gal Part A Black Gal Part A Clear 5 Gal Pail Part A Black 5 Gal Pail Part B Clear Quart Part B Black Quart Part B Clear Gal Part B Black Gal Part B Clear 5 Gal Pail Part B Black 5 Gal Pail Clear 50 ml Cartridge Black 50 ml Cartridge Clear 200 ml Cartridge Black 200 ml Cartridge Clear 400 ml Cartridge Black 400 ml Cartridge 400 ml Cartridge Clear 600 ml Cartridge Black 600 ml Cartridge
PVC; AL; Aluminum; FRP composites; Galvanized metals; Galvanized metals; GBS; Metals; Nylon; PC; Phenolics; Rigid plastics; SMC composites; Stainless Steel; Styrenics; Vinyl esters; Wood
Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
Bond
2-Part
High performance epoxy with high shear strength, impact toughness for structural assembly applications.
Polyvinyl Chloride; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Primer
1-Part
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
PVC; ABS; Absorbent materials; Acrylic; Aluminum (etched); Buna-N; Ceramic; Chipboard; Difficult-to-bond materials; Elastomers; Fabric; Leather; Metals; Neoprene; Nitrile; Nylon; Paper; Phenolic; Plastics; Polycarbonate; Polyester; Porous; Rubber; Steel (degreased); Steel (grit blasted); Wood; Wood (Balsa); Wood (Oak); Zinc Dichromate
Ethanol; Freon TA; Isopropanol; Isopropyl alcohol; Solvent; Unleaded gasoline; Water/glycol resistance
Bond; Instant Adhesives
1-Part
Designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength.
PVC; ABS; Acrylic; Acrylic plastic; Butyrate; Polycarbonate; Polystyrene; Porous; Styrene
Water resistant
Bond
1-Part
Fast-setting, medium bodied, high strength acrylic cement. Also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
Polyvinyl chloride (PVC); Ceramic; Aluminum; Copper; Fabric; Glass; Hard to bond substrates; Metal; Neoprene; Nylon; Plastic; Polycarbonate; Polyester; Rubber; Steel; Stone; Wood
Inorganic acids; Inorganic bases; Most Organic solvents; Salt spray; Very good resistance to water
Bond
2-Part
Two part urethane modified epoxy adhesive, good gap filling ability and prevent running and sagging during cure, very good resistance to water, acids and bases and most organic solvents.
PVC; ABS; Aluminum; Aluminum(Abrade); Brass; Brass (Abrade); Cold rolled Steel (Abrade); Cold Rolled Steel (Abraded)
; Cold Rolled Steel (Oakite degrease)
; Copper (Abrade); Etched Aluminum; FRP; Galvanized Steel (Electrodeposited); Galvanized Steel (Electrodeposited); Galvanized Steel (Hot dipped)
; Galvanized Steel (Hot dipped)
; Galvanized Steel (Oakite degrease)
; Galvanized Steel (Oakite degrease)
; Metal; Neoprene; Phenolic; PolyAcrylic; Polycarbonate; Polystryene; SBR; Stainless Steel (Abrade); Steel
Bond
2-Part
Long worklife toughened epoxy • 2-4 hrs. handling strength
Polyvinyl chloride (PVC); Ceramic; 2024 T3 Aluminum Abraded/Mek wipe; Aluminum; Copper; Fabric; Glass; Metal; Neoprene; Nylon; Other various substrates; Plastic; Polycarbonate; Polyester; Rubber; Steel; Stone; Wood
Good resistance to water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Bond
2-Part
A two part filled epoxy adhesive, room temperature to a tough, semi-rigid material, good wetting to most surfaces and is very thixotropic to resist running and sagging, very good vibration and impact resistance.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Part A Gray Quart Part A Gray Gal Part A Gray 5 Gal Pail Part B Gray Quart Part B Gray Gal Part B Gray 5 Gal Pail Gray 6 oz Barrier Techkit Red 10 ml Dual Syringe Red 50 ml Cartridge White 50 ml Cartridge Gray 50 ml Cartridge Gray 150 x 150 ml Ratio Pak Cartridge Gray 200 ml Cartridge Gray 300 x 300 ml Ratio Pak Cartridge Gray 400 ml Cartridge Gray 600 ml Cartridge Gray 1/2 Pint Kit
PVC; Rigid or flexible PVC; ABS; Acrylic; Aluminum; Aluminum (etched); Epoxyglass; Glass; Metals; Nylon; Phenolic; Plastics; Polybutylene Terephthalate (PBT); Polycarbonate; Steel
Boiling water; Heat/humidity; Isopropanol; Solvent
Bond; Instant Adhesives
1-Part
A high strength, low viscosity adhesive. Primarily designed for bonding rigid and flexible PVC to polycarbonate. Recommended for applications involving small gaps less than 0.25 mm.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
