Mactac IB1190XT Datasheet Mactac IB1190XT

CONTACT REP
Information provided by Gluespec

  • Description for Mactac IB1190XT

    Mactac IB1190XT is a Pressure sensitive Rubber based<br/>adhesive Tape used to Adhere Fabric, Felt and Semi-smooth surfaces

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Fluid Resistance: Resistant to water, Resistant to detergent, Chemical Resistance: Relative Solvent Resistance: Resistant to alcohol
    Application Type Bond, Mounting
    Material Form Tape
    Substrate Fabric, Neoprene (Foam Destruction), Nitrile PVC (Foam Destruction), Stainless Steel, EPDM, EVA Blend (Foam Destruction), Foam Fabrication, LSE substrates, Felt
    Industry General purpose bonding applications, Automotive Interior, Insulation Installation, General purpose mounting applications
    Manufacturer Mactac
    Chemistry Rubber based adhesive
    Cure Method Pressure sensitive
    Tape Width (mm) 1,372 Web Width, 1,524 Web Width
    Unwind Side Adhesion to Steel (oz/in) 192
    Double Sided Double Coated
    Liner Side Adhesion to Steel (oz/in) 192
    Adhesive Thickness (Liner Side) - Double Sided Tapes (mm) 0.051
    Unwind Side Thickness (mm) 0
    Kraft Liner Type: 60# White SCK
    High Temperature Resistance (°C) 82
    Low Temperature Resistance (°C) -18
    Can Be Used In Conjunction With These Materials Gasket Fabrication
    Tape Backing/Carrier 0.5 mil PET Carrier

  • Technical Data for Mactac IB1190XT

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Detergent Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance
      • Chemical Resistance : Relative Solvent Resistance : Alcohol Resistance
    • Application Type
      • Adhesive
    • Material Form
      • Tape
    • Substrate
      • Foam
      • Low Surface Energy
      • Polyvinyl chloride (PVC)
      • Neoprene
      • EPM/EPDM
      • Ethylene-Vinyl Acetate (EVA)
      • Fabric
      • Stainless Steel
      • Other
    • Industry
      • Interior
      • General Purpose
      • Insulation
      • Appliances
      • Construction
    • Chemistry
      • Rubber
    • Cure Method
      • Pressure Sensitive (min)
    • Can Be Used In Conjunction With These Materials
      • Gaskets
    • Tape Backing/Carrier
      • Polyester (PET)
    Specifications
    Bond Strength
    General Bond Strength (psi) Register to view
    Peel Strength (piw)
    Shear Strength (psi)
    Tensile Strength (psi)
    Tape Properties
    Tape Width (mm) Register to view
    Unwind Side Adhesion to Steel (oz/in)
    Double Sided
    Liner Side Adhesion to Steel (oz/in)
    Adhesive Thickness (Liner Side) - Double Sided Tapes (mm)
    Unwind Side Thickness (mm)
    Material Resistance
    High Temperature Resistance (°C) Register to view
    Low Temperature Resistance (°C)
    Hardness
    Elongation (%) Register to view
    Business Information
    Shelf Life Details Register to view
    Not Good For
    Don't Use For Register to view

  • Best Practices for Mactac IB1190XT

    *See Terms of Use Below

    1. Surface Preparation

      For best performance surfaces must be clean, dry and free of any oil, grease or other contaminant.

  • Comparable Materials for Mactac IB1190XT

    *See Terms of Use Below

    Spec Engine® Results

    • Mactac
      IB1190XTP2(Mactac)

      Mactac IB1190XTP2 is a Pressure sensitive Rubber based adhesive Tape used to Adhere Fabric, Felt and Semi-smooth surfaces

    • Mactac
      IB1175XTL12(Mactac)

      Mactac IB1175XTL12 is a Pressure sensitive Rubber-based adhesive Tape used to Adhere Felt, Fabric and Semi-smooth surfaces

    • Mactac
      IB1175XT(Mactac)

      Mactac IB1175XT is a Pressure sensitive Rubber-based adhesive Tape used to Adhere Felt, Fabric and Semi-smooth surfaces

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Mactac IB1190XT

All Mactac Materials
View Now

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
General Bond Strength Test Methods
General Bond Strength Substrate Test Method
High initial tack
Excellent adhesion
192 (Oz/in.) Stainless Steel Loop tack, PSTC-16-Method A, Backed with 2 mil PET, Liner, Values given are typical and not for use in specifications
192 (Oz/in.) Stainless Steel Loop tack, PSTC-16-Method A, Backed with 2 mil PET, Unwind, Values given are typical and not for use in specifications,
Peel Strength Test Methods
Peel Strength Cure Time Substrate Test Method
192 (Oz/in.) 30 min Stainless Steel 2 mil PET Backed, PSTC-101-Method A, Liner, Values given are typical and not for use in specifications
192 (Oz/in.) 30 min Stainless Steel 2 mil PET Backed, PSTC-101-Method A, Unwind, Values given are typical and not for use in specifications
Tensile Strength Test Methods
Tensile Strength Test Method
160 (Oz./in.) MD/CD, ASTM-D882, Values given are typical and not for use in specifications
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
82°C End Use, Service Temperature
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-18°C End Use, Service Temperature
Elongation Test Methods
Elongation Test Method
100 % MD, ASTM-D882, Values given are typical and not for use in specifications