

-
Description for WEICON Weiconlock AN 306-48 Retaining Cylindrical Assemblies
• Retaining cylindrical assemblies • High-temperature-resistant • Colour green • For thread connections up to M 20 R ¾" • Gap bridging up to max. 0.15 mm.Brand WEICONLOCK Application Type Retaining compound 1 Part or 2 Part 1-Part Material Form Liquid Substrate M 10 screws, 8.8 grade Industry For thread connections up to M 20 R ¾" Manufacturer WEICON Chemistry Anaerobic Cure Method Anaerobic Gap Fill (in) <0.006 Cure Time (min) 120 to 240 Viscosity (cPs) Medium, 550 Color Green Torque (psi) 30-35 (Nm), 55-77 (Nm) High Temperature Resistance (°C) 175, High-temperature-resistant Low Temperature Resistance (°C) -60 -
Technical Data for WEICON Weiconlock AN 306-48 Retaining Cylindrical Assemblies
Overview
-
Application Type
- Retaining Compound
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Liquid
-
Substrate
- Metal - M 10 screws, 8.8 grade
-
Industry
- Joints - For thread connections up to M 20 R ¾"
- Other - Retaining cylindrical assemblies
-
Chemistry
- Other - Anaerobic
-
Application Method
- Dispenser - Manual applicators, Automatic applicators
-
Cure Method
- Anaerobic
-
Color
- Green - Green
-
Brand
- WEICONLOCK
Specifications
Cure Specs
Gap Fill (in) <0.006 Cure Time (min) 120 to 240 Test Method Viscosity (cPs) Medium, 550 Test Method Fixture or Handling Strength Time (min) 5.00 Test Method Bond Strength
Torque (psi) 30-35 (Nm), 55-77 (Nm) General Bond Strength (psi) High Shear Strength (psi) 3,626 to 5,076 Test Method Material Resistance
High Temperature Resistance (°C) 175, High-temperature-resistant Low Temperature Resistance (°C) -60 Business Information
Shelf Life Details WEICONLOCK has a shelf life of at least 24 months, when stored at room temperature in closed original container. Protect from heat sources and direct sunlight. The air contained in the Pen keeps WEICONLOCK liquid. Shelf Life Temperature (°F) 68 to 77 Room temperature Shelf Life (mon) >24 -
-
Best Practices for WEICON Weiconlock AN 306-48 Retaining Cylindrical Assemblies
-
Surface Preparation
Surface pre-treatment: To achieve optimum results, the mounting parts should be degreased and cleaned, e.g. with WEICON Surface (roughen the surfaces, if required). WEICONLOCK can also be used on uncleaned surfaces, e.g. screws as delivered. However, the cleaner the surface, the better the results achieved.
-
Application
Processing: WEICONLOCK is applied evenly straight from the Pen with the help of the dosing tip
avoid direct contact between dosing tip/metal. In the case of pressed joints and larger parts to be joined, both surfaces should always be wetted thinly and evenly. Join parts swiftly. For sliding seats, twist parts against each other when joining for optimum spreading of the adhesive. Bonded parts should not be moved until handling strength is reached. Do not pour any WEICONLOCK back into the bottle that has already come into contact with metal. Even extremely small metal particles cause the adhesive to cure inside the bottle. Therefore, in serial production, the use of dosing devices is recommended.
-
Removal
Hard to disassemble
-
-
Comparable Materials for WEICON Weiconlock AN 306-48 Retaining Cylindrical Assemblies
Spec Engine® Results
Popular Articles
Testing the effectiveness of surface treatments
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Viscosity Test Methods
Viscosity | Test Method | Temperature |
---|---|---|
Medium | ||
550 cPs | According to brookfield, nt | 25°C |
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time | Fixture-Handling Strength Test Method | Fixture-Handling Strength Time Temperature |
---|---|---|
5.00 min | Handling strength | 20 to 25°C Room temperature |
Cure Time Test Methods
Cure Time | Test Method |
---|---|
120 to 240 min | Final strength (100%) |
Shear Strength Test Methods
Shear Strength | Substrate | Test Method |
---|---|---|
3,626 to 5,076 psi | M 10 screws, 8.8 grade | (DIN 54452) |

1 VIEW FREE
Don't Leave!
View WEICON - Weiconlock AN 306-48 Retaining Cylindrical Assemblies now.